background
INDUSTRIAL >> METAL WORKING FLUID >>

CUTTING FLUID

PROSYNTHCUT 550

PROSYNTHCUT 550 is an oil and nitrite-free chemical grinding coolant that provides excellent rust protection with cast iron. It may be highly diluted with water while still providing protection to freshly ground surfaces.

Data Sheet  


PROSYNTHCUT 555

PROSYNTHCUT 555 is a synthetic mild duty machining and grinding coolant for ferrous metals. Its clear solution gives good visibility during operation and its excellent extreme pressure additives provide excellent lubricity and anti welding property.

Data Sheet  


FASTCUT

The FASTCUT are high performance, multi-purpose water soluble, cutting fluids. Fastcut are formulated from high quality mineral base stocks, emulsifiers and additives to provide effective machining performance in a wide variety of operations. The higher oil content emulsion gives excellent cutting performance and outstanding machine tool lubrication and corrosion protection. They are designed for a range of light to moderate duty cutting operations to machining on ferrous and non-ferrous metals.

Data Sheet  


PROSOLCUT SUPREME

Prosolcut Supreme soluble oil is a high quality cutting fluid for use with both ferrous and non-ferrous metals. Soluble oils are suspensions of oil droplets in hard water made possible by blending the oil with emulsifying and blending agents.They provide good cooling with moderate lubricity.

Data Sheet  


PROSOLCUT EP2

Prosolcut EP 2 Oil this is a general purpose emulsifiable oil and forms a milky white emulsion. It meets the requirements as specified by IS 1115 – 1986 and is suitable for all metals and for all machining operations where emulsifiable oils are normally used. The most common emulsion strength used for machining ranges from 5 to 10 percent depending on the severity of machining.

Data Sheet  


PROSYNTHCUT-100

PROSYNTHCUT-100 is a heavy duty, semi synthetic biostable micro emulsion. It has been developed to meet the toughest demands of today’s metal working industry. High performance multipurpose long-life semi synthetic cutting fluid & recommended for machining a variety of ferrous and non-ferrous metals.

Data Sheet  


PROSYNTHCUT -1000

Prosynthcut-1000 is an oil free fully synthetic type coolant making it ideally suited for modern grinding technique. The solution formed is fully clear, alkaline in character and has quite remarkable anti-rust properties. Also the clarity of solution is well maintained in continuous service on a grinding machine. Since the solution remains completely homogenous in service, there is no trace of wheel loading.

Data Sheet  


PROSOLCUT

The PROSOLCUT are high performance, multi-purpose water soluble, cutting fluids. They are formulated from high quality vegetable base oils, emulsifiers and additives to provide effective machining performance in a wide variety of operations. The higher oil content emulsion gives excellent cutting performance and outstanding machine tool lubrication and corrosion protection.

Data Sheet  


VISTACUT


Vistacut Oil this is a general purpose emulsifiable oil and forms a milky white emulsion. It meets the requirements as specified by IS 1115 - 1986 and is suitable for all metals and for all machining operations where emulsifiable oils are normally used. The most common emulsion strength used for machining ranges from 5 to 10 percent depending on the severity of machining.

Data Sheet  


PROSOLCUT EP

Prosolcut EP Oil this is a general purpose emulsifiable oil and forms a milky white emulsion. It meets the equirements as specified by IS 1115 – 1986 and is suitable for all metals and for all machining operations where emulsifiable oils are normally used. The most common emulsion strength used for machining ranges from 5 to 10 percent depending on the severity of machining.

Data Sheet  


© 2010 Petrelplus Inc   |   All Rights Reserved   |   Developed by   Myweblo