background
FOOD GRADE >> FOOD GRADE OILS

FOOD GRADE OILS

HYDROPLUS FG

This oil for high pressure applications , suitable within a wide temperature range. Due to their very good surface wetting properties these special oils offer excellent long term lubrication. Thus , they are ideally suited for the lubrication of hydraulic system , gears, chains, bearing, lifters etc

Data Sheet  


GEARPLUS FG

Fully synthetic gear oils with high oxidation resistance. The Gear Oil Series oil are also suitable for the long term lubrication of chains & spindles due their wide operating range. They form a protective lubricating film on metal surface & maintain low friction coefficient even at high loads.

Data Sheet  


GEARPLUS FGHT

These synthetic oils are suitable for the application at high temperatures. The high performance lubricants are characterized by very good pressure absorption capacity & high heat stability. Suitable for all types of gears where High temperature arises.

Data Sheet  


SYF - 990/ CHAINFLUID FG

Soild free high temperature chain oils for the lubrication of conveyor chains in the packaging industry. These products minimise lubricant consumption on conveyor chains in high temperature ovens & dryers & prevent residues as well as smoke formation even at high temperatures.

Data Sheet  


SYF - 990/ CHAINFLUID PLUS

Synthetic oil with especially selected EP additives for the lubrication of load, drive & transportation conveyer chains. This lubricants avoid residues & is suitable for operating temperature up to 240 C (464 F). Recommended to use for food & pharmaceutical industry.

Data Sheet  


SYF - 990/ CHAINFLUID FGHT

This synthetic oil eveporates without residues at high temperature. Applied at above 220 C (428 C) it forms a smooth dry film with good lubricating properties up to +900 C (428 F) (1652 F). This oil can use where risk of fire in bakery tunnels ovens. Apply cold chains only.

Data Sheet  


SYF - 990/COMPRESSOR PLUS FG

Physiologically harmless compressor oils for high & low operating temperatures. These special oils are perticularly suitable for the long term lubrication of e.g. piston or screw compressors & enable oil change intervals up to 8000 hrs.

Data Sheet  


SYF - 990/ Freezplus FG

Refrigeration & compressor Oils is a line of premium synthetic refrigeration lubricants formulated with PAO or PAE base stocks. These oils have excellent thermal stability & extremely low pour points for use in refrigeration & other compressors in severe industrial service.

Data Sheet  


SYF - 900/ GENERAL PURPOSE FG

Taste & odourless universal oil for the food,beverages, cosmetic & pharmaceutical industries. Suitable in applications that require excellent lubrication & friction reducing properties at operating temperatures upto 220 C (428 F).This oil minimises friction on metal surface.

Data Sheet  


SYF - 900/ GENERAL PURPOSE FGHT

Universal oil with special PTFE additives that provide optimum lubricating properties & protection against friction & wear. This oil is taste & odourless general purpose lubricating oil & work upto 600 C (1180 f).

Data Sheet  


SYF - 990/VACUUMPLUS FG

Synthetic high performance lubricants based on perfluorinated polyether. These lubricants show excellent performance at high temperature upto 300 C (572 F), thus enabling long lubricating intervals. These thermally & chemically stable lubricating oils have excellent lubricating properties. They are used as a sealing agent in oxygen, vacuum & fitting applications & as dielectric hydraulic & heat transmission liquids.

Data Sheet  


SYF - 990/ THERMOPLUS FG (Heat Transfer fluid)

Fully synthetic nontoxic heat transfer fluid with specially selected additives to provide outstanding protection & heat transfer suitable for food processing or pharmaceutical operation with bulk operating temperature 325 C (625 F), for central cooking facility, dying edible oil, deodorizing & the heating deep fruit oil. These oil have extra properties for very low oxidation.

Data Sheet  


SYF - 900/FRHF FG (Fire resistant hydraulic fluid)

This is a fire resistance, water glycol based hydraulic fluid that is as a lubricant with incidental food contact, for use in & around food processing areas provides excellent lubricity, imparts resistance against corrosion & rusting, This is oxidatively stable, & will prolong the service life of equipment. Machinery can run longer between routine maintenance & cleaning. This is water soluble & in the event of a leak or spill, is easily cleaned up without the use of solvents that can contaminate food was developed for food processing applications, such as fryers, ovens, cookers & other heat applications.

Data Sheet  


SYF - 990/CLEANSYNTH FG (Resistance agents)

Sugar dissolving lubricant for the lubrication of rocker arms, joints,lifters, spindles, chains & pincers. Due to its high density it penetrates mineral oil based emulsion & allows a smooth lubricant change. These oil have sugar dissolving without taste & odourless also reduce sugar build upon chain for increase life. These oil allowing penetration to the friction point.

Data Sheet  


SYF- 990/ VACUUMPLUS FGHT

Fully synthetic special oil for the application in vacuum pumps. They are suitable for the application in a wide temperature range & are resistance to high pressures. Moreover, they are resistant to oxidation & protect extremely well against wear. They are resistance at high temperature & high speed machines.

Data Sheet  


SYF - 990/CLEANSYNTH / VG-1 & VG-2 (Resistance agents)

Fully synthetic, liquiud cleaning & dispersing agents that are very compatible with metals & elastomers. They are suitable as carrier medium for the food processing industry to dilute lubricants. These oil have to use stable aqueous solution of synthetic lubricating fluid for especially use in confectionery.

Data Sheet  


SYF - 990/SILICON FLUID FG

Silicon oils with a wide temperature range up to 250 C (482 F) & excellent low temperature properties. These transparent polymethylsiloxanes have extraordinary separation efficiency & are compatible with most seals & elastomers. Therefore , they are ideally suited as release & lubricating agents for materials pairing plastic / metal or plastic/plastic .

Data Sheet  


SYF - 990/ PROSYNTHCUT FG (Cutting fluid)

Fully synthetic cutting oils,ideally suited for the lubrication of cross cutters & disc-cut system in the paper & corrugating industry. specially selected raw materials ensure good adhesion & excellent lubricating properties. These cutting fluids have 100% nitrate & chlorine free with emulsifiable coolant chemistry. These PROSYNTHCUT FG provide excellent rust protection.

Data Sheet  


SYF - 990/DRAWPLUS FG (Drawing & punching fluid)

This is a high quality food grade solvent oil. It also suitable for pressing & drawing of aluminum sheets for production of containers, trays & caps used in pharmaceutical & food industry & blanking of grates, fins & heat exchangers used in mechanical & electrical industry.

Data Sheet  


SYF-990_HYDROPLUS FG

SYF-990_HYDROPLUS FG Synthetic Food Grade Lubricant is a range of non-toxic, mineral hydrocarbon free hydraulic fluids for use within clean environments. The product is approved by NSF International as H1 grade Lubricant. SYF-990_HYDROPLUS FG Synthetic Food Grade Lubricant contain the unique extreme pressure and load carrying performance characteristics designed to protect gear teeth on start up and provide protection during use.

Data Sheet  


SYF 990_DRAWPLUS FG

SYF 990_DRAWPLUS FG Synthetic Food Grade Lubricant is a range of non-toxic, mineral hydrocarbon free drawing fluids for use within clean environments. The product is approved by NSF International as H1 grade Lubricant.

Data Sheet  


SYF 990_COMPRESSORPLUS FG

SYF 990_COMPRESSORPLUS FG

Data Sheet  


SYF 990-THERMOPLUS FG

SYF 990-THERMOPLUS FG

Data Sheet  


© 2010 Petrelplus Inc   |   All Rights Reserved   |   Developed by   Myweblo