background
INDUSTRIAL >> METAL WORKING FLUID

METAL WORKING FLUID

PROSYNTHCUT 550

PROSYNTHCUT 550 is an oil and nitrite-free chemical grinding coolant that provides excellent rust protection with cast iron. It may be highly diluted with water while still providing protection to freshly ground surfaces.

Data Sheet  


PROSYNTHCUT 555

PROSYNTHCUT 555 is a synthetic mild duty machining and grinding coolant for ferrous metals. Its clear solution gives good visibility during operation and its excellent extreme pressure additives provide excellent lubricity and anti welding property.

Data Sheet  


PREVENTPLUS CR-1181

Preventplus –CR-1181 is a brown solvent deposited rust preventive fluid which, after evaporation of the solvent, gives a hard waxy yet flexible film..

Data Sheet  


FASTCUT

The FASTCUT are high performance, multi-purpose water soluble, cutting fluids. Fastcut are formulated from high quality mineral base stocks, emulsifiers and additives to provide effective machining performance in a wide variety of operations. The higher oil content emulsion gives excellent cutting performance and outstanding machine tool lubrication and corrosion protection. They are designed for a range of light to moderate duty cutting operations to machining on ferrous and non-ferrous metals.

Data Sheet  


PROSOLCUT SUPREME

Prosolcut Supreme soluble oil is a high quality cutting fluid for use with both ferrous and non-ferrous metals. Soluble oils are suspensions of oil droplets in hard water made possible by blending the oil with emulsifying and blending agents.They provide good cooling with moderate lubricity.

Data Sheet  


PROSOLCUT EP2

Prosolcut EP 2 Oil this is a general purpose emulsifiable oil and forms a milky white emulsion. It meets the requirements as specified by IS 1115 – 1986 and is suitable for all metals and for all machining operations where emulsifiable oils are normally used. The most common emulsion strength used for machining ranges from 5 to 10 percent depending on the severity of machining.

Data Sheet  


PROSYNTHCUT-100

PROSYNTHCUT-100 is a heavy duty, semi synthetic biostable micro emulsion. It has been developed to meet the toughest demands of today’s metal working industry. High performance multipurpose long-life semi synthetic cutting fluid & recommended for machining a variety of ferrous and non-ferrous metals.

Data Sheet  


PROSYNTHCUT -1000

Prosynthcut-1000 is an oil free fully synthetic type coolant making it ideally suited for modern grinding technique. The solution formed is fully clear, alkaline in character and has quite remarkable anti-rust properties. Also the clarity of solution is well maintained in continuous service on a grinding machine. Since the solution remains completely homogenous in service, there is no trace of wheel loading.

Data Sheet  


PREVENTPLUS-A1

Prevent plus A-1 Series products are premium quality DW type rust preventive materials designed to protect metal surfaces from rust and corrosion. They are formulated using light-bodied petroleum solvents with polar rust preventive, water displacement and fingerprint neutralizing additives. These rust preventives are easy to apply and easy to remove making their application less man-power intensive.

Data Sheet  


PRONEATCUT 585

Data Sheet  


EDM OIL-20 & 30

EDM OIL is highly refined oil, recommended for submerged ram –type electrical discharge machining of dies and other complex
recessed shapes. This is a low viscosity oil with high flash point, slight odor and natural resistance to oxidation. Its low level of
volatility provides dependable safety and minimal loss from evaporation during use.

Data Sheet  


PREVENTPLUS-A6

These are specially selected lubricating oils, containing soluble anti-rust inhibitors, to offer high degree of corrosion prevention. These grades serve as lubricants as well as temporary protective. PREVENTPLUS A-6 can be applied by dipping, spraying, brushing roller coating, flow coating, flushing or circulation, but the application surface must be cleaned and dried.

Data Sheet  


PREVENTPLUS-A5

Prevent plus A-5 is a superior quality rust preventive specially designed for protecting all types of bearings as well as metal sheets and components for extended durations. It can also be used for inter process treatment as well as for
application on the precision parts at the packing stage.

Data Sheet  


PREVENTPLUS AFR-5,10,15

These grades are solvent deposited water displacing type premium quality corrosion preventives. These grades offer soft waxy protective film by solvent evaporation. They have excellent water displacing characteristics and resistance to finger print corrosion
These grades gives excellent rust protection for severe environmental conditions & long term protection. These grade is even used in acidic atmosphere as acid fume resistant.

Data Sheet  


PREVENTPLUS SS-600

These are specially selected lubricating oils, containing soluble anti-rust inhibitors, to offer high degree of corrosion prevention. These grades serve as lubricants as well as temporary protective.

Data Sheet  


PREVENTPLUS DW-92

These are soft film, solvent deposited, water displacing type, corrosion preventives. These fluids can be applied directly to water wet metal surfaces, where they displace water, leaving a protective film.The protective films of all these grades can be removed by wiping off with rags/waste soaked in kerosene/mineral turpentine or by alkaline degreasents or solvent degreasing methods.

Data Sheet  


PREVENTPLUS DW 505

Preventplus DW 505 is a powerful solvent & wax base deposited corrosion preventive with good dewatering properties. The solvent, after evaporation, leaves a firm greasy protective film.

Data Sheet  


PREVENTPLUS TR 30

Preventplus TR 30 is an extremely effective Rust preventive compound for use under the most severe corrosion conditions. Preventplus TR 30 can be used on farm machinery, construction equipments, pipes, Industrial Machines, tanks and similar steel structure where rust and corrosion control is desired, when used in these functions, it should be considered that removal of Preventplus TR 30 will require soaking or wiping down with a safety solvent.

Data Sheet  


PREVENTPLUS CR 517

Preventplus CR-517 is a premium performance product primarily intended as run-in or lay-up lubricant, which provide effective rust preventive films on the internal surfaces of machinery. It is particularly suitable as run-in lubricant for diesel and gasoline engines.

Data Sheet  


QUENCHPLUS-55

Quenchplus 55 is blended from specially selected lube oil base stocks with inherent oxidation and thermal stability having high viscosity index, fluidity and low volatility.
Quenchplus - 55 is a straight mineral type oil processing normal quenching characteristics.

Data Sheet  


QUENCHPLUS-65

It is a blend of highly refined HVI base oils and selective additives to provide high thermal stability and resistance to oxidation and sludge formation. It is suitable for marquenching of high precision and high quality products like automotive gears, transmission components, tools,dies,bearings, high carbon steels etc.

Data Sheet  


SYNTHQUENCH-100

Data Sheet  


HONPLUS-55

Honplus oil is blended from low viscosity grades specially fortified with special additives with good lubricity & EP properties.
They act as good flushing agent for an excellent surface finish and prolong honing stone life. It has an extra fluidity to ensure fast and through removal of any material which could cause stone glazing

Data Sheet  


BROACHING OIL

Data Sheet  


RUSTREMOVE WS

This product is an unique, low foam, general purpose cleaners and de-greaser,neutral in use dilute,safe on all washable surface a product of new deterfent technology. It is an excellent industrial cleaner and is modern metal safe cleaner, engineered to remove haevy grease and carbon from most metals, recommended to clean engines, auto components, carburetors and heavy equipment. It is itself fully biodegradable although soiled solution may contain non-biodegradable although soiled solution may contain non-biodegradable substances removed from objects being cleaned.

Data Sheet  


CLEANER-M-86

This product is a specially developed cleanser for cleaning surfaces coated with rust preventive films.
CLEANERS-M-86 formulated with selective chemicals resulting in less operational/evaporation losses. CLEANER-M-86 has light colour and has no offensive odour, and instantly removes the film witout any stains with no (minimum) damage to paint,when applied to the subject.

Data Sheet  


NEATPLUS 23

Neatplus-23 is active type neat cutting oil. This oil contain a sulphurised fatty material, which improves oiliness property thus providing better surface finish.
Sulphur incorporated in this oil become chemically active at the tool-work piece-chip interface and ensures protection to the cutting tool over a wide range of operating temperatures.

Data Sheet  


PROSOLCUT

The PROSOLCUT are high performance, multi-purpose water soluble, cutting fluids. They are formulated from high quality vegetable base oils, emulsifiers and additives to provide effective machining performance in a wide variety of operations. The higher oil content emulsion gives excellent cutting performance and outstanding machine tool lubrication and corrosion protection.

Data Sheet  


VISTACUT


Vistacut Oil this is a general purpose emulsifiable oil and forms a milky white emulsion. It meets the requirements as specified by IS 1115 - 1986 and is suitable for all metals and for all machining operations where emulsifiable oils are normally used. The most common emulsion strength used for machining ranges from 5 to 10 percent depending on the severity of machining.

Data Sheet  


PRONEATCUT-105,195

Proneatcut 105 & 195 is a neat cutting oil containing a sulphurised fatty additive (nonstaining) in a solvent
refined mineral oil.

Data Sheet  


PROSOLCUT EP

Prosolcut EP Oil this is a general purpose emulsifiable oil and forms a milky white emulsion. It meets the equirements as specified by IS 1115 – 1986 and is suitable for all metals and for all machining operations where emulsifiable oils are normally used. The most common emulsion strength used for machining ranges from 5 to 10 percent depending on the severity of machining.

Data Sheet  


CLEANPLUS-55

CLEANPLUS-55 is a concentrated cleaner for cleaning all types of glass and mirrors. Regular cleaning of
windows, glass display cases and mirrors with CLEANPLUS-55, leaves the surface clean and streak-free.

Data Sheet  


COOLPLUS-S

The COOLPLUS-S are high performance, multi-purpose water soluble, COOLANT fluids. They are formulated from high quality vegetable base oils, emulsifiers and additives to provide effective machining performance in a wide variety of operations. The
higher oil content emulsion gives excellent COOLANT performance and outstanding machine tool lubrication and corrosion protection.

Data Sheet  


WAYLUBE 32,46,68,100,150

WAYLUBE Series are premium high performance oils intended for industrial and WAYLUBE service where anti-wear lubricants are required. The WAYLUBE Series oils are designed to satisfy the performance requirements for a wide range of hydraulic components in systems subjected to high-pressure, hightemperature operating environments. Their high level of resistance to oxidation and good thermal stability characteristics help reduce deposit formation and help prevent sluggish system
operation. They provide good protection against rust and corrosion in high humidity operations or where low levels of moisture are unavoidable.

Data Sheet  


WAYLUBE 220, 320, 460, 680

WAYLUBE Series are premium high performance oils intended for industrial and WAYLUBE service where anti-wear lubricants are required. The WAYLUBE Series oils are designed to satisfy the performance requirements for a wide range of hydraulic components in systems subjected to high-pressure, hightemperature operating environments. Their high level of resistance to oxidation and good thermal stability characteristics help reduce deposit formation and help prevent sluggish system
operation. They provide good protection against rust and corrosion in high humidity operations or where low levels of moisture are unavoidable.

Data Sheet  


PRONEATCUT S 40

PRONEATCUT-S-40 are high performance straight semi synthetic oils offering superior performance for machining stainless steel, titanium & non-ferrous metals. This an extreme pressure lubricant suitable for cold wire drawing operations on high speed systems.

Data Sheet  


© 2010 Petrelplus Inc   |   All Rights Reserved   |   Developed by   Myweblo