SYG-1380 Molybdenum grease
SYG-1380 GREASE
Product Description
SYG-1380
is
manufactured from a synthesized hydrocarbon fluid and a non soap thickener with
Molybdenum Disulphide. It offers outstanding performance over wide temperature
ranges, with the excellent retention and
resistance to high-temperature degradation. In addition, it resists
water washing, provides superior load-carrying ability, reduces frictional
drag, and prevents excessive wear. Other tests show that SYG-1380 prevents
friction oxidation (fretting) and lubricates rolling element bearings under
conditions of high speeds and temperatures. It has also shown superior ability
to lubricate heavily loaded sliding mechanisms, such as wing flap screw jacks.
SYG-1380
is
designed for the lubrication of plain and rolling bearings at low to high
speeds, and splines, screws, worm gears, and other mechanisms where high
friction reduction, low wear, and low lubricant friction losses are required.
It provides minimum resistance to starting at extreme low temperatures (down to
-54°C/-65°C) as well as low running torque.
SYG-1380
is
recommended for use in landing wheel assemblies, control systems and actuators,
screw jacks, servo devices, sealed-bearing motors, oscillating bearings,
marine, marine blowers and helicopter rotor bearings on military and civil
aircraft. Subject to equipment manufacturer approvals, it can also be used on
naval shipboard auxiliary machinery.
SYG-1380
also
is recommended for industrial lubrication, including sealed or re-pack able
ball and roller bearings wherever extreme temperature conditions, high speeds,
or water washing resistance are factors. Typical industrial applications
include conveyor bearings, small alternator bearings, high-speed miniature ball
bearings, and bearing applications where oscillatory motion, and vibration
create problems.
Recommended up to 375°C Temp.
Features
and Benefits
Improved friction
reduction, Low wear rates, low lubricant drag, wide temperature range, high
thermal stability, compatibility with mineral-oil-base greases, extreme
pressure characteristics, and high resistance to water washing
Typical
Properties
SYG-1380 |
|
Thickener
Type |
Inorganic |
Fluid
Type |
Synthetic
Hydrocarbon |
Colour,
Visual |
Visual
Grey |
Structure |
Smooth,
buttery |
NLGI
Grade |
2 |
Penetration,
ASTM D 217, |
25°C |
60
Strokes |
270 |
Maximum
Operating Temperature |
380
°C |
Dropping
point, °C, ASTM D 566, IP 132 |
NIL |
Corrosion
Prevention, ASTM D 1743 |
Pass |
Load
Wear Index, ASTM D 2596, kg |
30 |
Copper
corrosion, ASTM D 130, 24 HR AT 100°C |
None |
Water
Washout, ASTM D 1264,38°C |
1 |
Four-Ball
Wear Test, 40 kg at 75°C, 1200 rpm,1hr scar Diam, mm,ASTM D 2266,max |
1.3 |
Evaporation
loss ,ASTM D 972,22 HR AT 177°C,WT % |
10 |
Oil
separation,30 hr at 177°C,vol% |
5 |
Low temperature
Torque, ASTM D 1478, -54°C(-65°F),after
100,000 Strokes, starting/running g-cm |
10,000/1,000 |
Rubber Swell, FTM
3603,L Type Synthetic 1week
at 70°C, vol % |
6 |
Available Packs : 1, 5,
18, 180 Kg