SYG–1365
SYNTHETIC
GREASE
Product
Description
SYG-1365 is high performance,
extreme-pressure greases which combine a synthetic base fluid with a lithium
complex soap thickener. The thickener system provides a high dropping point,
excellent resistance to water wash, and a tenacious structural stability. The
unique physical properties of the synthetic base oil, combined with selective
additives, provide outstanding protection against wear, rust, corrosion and
high temperature degradation.
The wax-free feature of the
synthetic base oil allows for low temperature mobility/pump ability and very
low starting and running torque values. Also, the traction property of the
synthetic base fluid in these greases is considerably lower than mineral oil,
allowing for temperature reductions in the load zone of rolling element
bearings.
SYG-1365 NLGI Grade 2 grease is
recommended for industrial applications at both high and low temperatures. It
will provide outstanding bearing protection under heavy loads at low to
moderately high speeds, and where water is a factor. SYG-1365 has performed extremely well in steel
mill and paper mill applications. It also has proven exceptional severe service
automotive chassis grease.
Benefits
- SYG-1365 synthetic
greases provide the following advantages when compared with mineral oil
greases intended for similar services
- Operating range of -40°C to +240°C
- Excellent Resistant to rust, corrosion and
oxidation.
- Outstanding structural stability in the
presence of water.
- Excellent wear protection under heavy loads
and high temperature
- Power saving capabilities
- Extended re lubrications intervals
- Low volatility
Typical Properties
SYG-1365 |
|
Test
Method |
NLGI GRADE |
2 |
|
Soap Type |
Lithium Complex |
|
Structure, Visual |
Smooth, Slight Tack |
|
Color, Visual |
White |
|
Penetration, Worked x 60 strokes x 10,000 strokes x 100,000 strokes |
305 322 334 |
ASTM D 217 |
Dropping Point °C (°F) |
246 (475) |
ASTM D 2265 |
Viscosity of Oil CST at 40°C CST at 100°C SUS at 100°F SUS at 210°F |
460 46.5 2400 215 |
ASTM D 445 |
ISO VG |
|
|
EP and Wear Protection Four Ball Wear Test, Scar dia., mm, max Four Ball EP Weld Load, kg Load Wear Index |
0.80 250 49 |
ASTM D 2266 ASTM D 2596 |
Corrosion Prevention, Rust Test Emcor/SKF Water Wash Test, IP 220 modified Water Washout, 79°C (175°F), wt % |
Pass 0/0 3 |
ASTM D 1743 ASTM D 1264 |
Bomb Oxidation, psi loss, 100hr, 210°F Bomb Oxidation, psi loss, 500hr, 210°F |
2 4 |
ASTM D 942 ASTM D 942 |
Shelf Life: 60 Months from manufacturing
month.