SYG–1368
SYNTHETIC LITHIUM GREASE WITH MOLY
Product
Description
protection against wear, rust,
corrosion and high temperature degradation. The wax-free feature of the
synthetic base oil allows for low temperature mobility/pumpability and very low
starting and running torque values. Also, the traction property of the
synthetic base fluid in these greases is considerably lower than mineral oil,
allowing for temperature reductions in the load zone of rolling element bearings.
Application:
SYG-1368 is recommended for
industrial applications which need a lubricant that can perform normal
functions yet go far beyond in terms of high and low temperatures and long-life
performance. It is an NLGI Grade 2 grease having the cold temperature pumping
resistance of most NLGI Grade 0 greases. It is a true wide temperature, multi
service grease. SYG-1368/460 an NLGI Grade 1 ½ grease, is recommended for
industrial applications at both high and low temperatures. It will provide outstanding
bearing protection under heavy loads at low to moderately high speeds, and
where water is a factor. SYG-1368 has performed extremely well in steel mill
and paper mill applications. It also has proven an exceptional severe service
automotive chassis grease.
Advantages:
SYG-1368 synthetic greases provide
the following advantages when compared with mineral oil greases intended for
similar service:
· Operating range of -40° C to + 240° C
· Excellent resistance to rust, corrosion and oxidation
· Outstanding structural stability in the presence of water
· Excellent wear protection under heavy loads and high
temperatures
· Power saving capabilities
· Extended relubrication intervals
· Low volatility
Typical
Properties
SYG-1368 |
220 |
460 |
Test Method |
NLGI GRADE |
2 |
1 ½ |
|
Soap Type |
|
||
Structure, Visual |
Smooth, Slight Tack |
||
Color, Visual |
|
||
Penetration, Worked x 60 strokes x 10,000 strokes x 100,000 strokes |
280 295 330 max. |
305 322 334 |
ASTM D 217 |
Dropping Point °C (°F) |
246 (475) |
246 (475) |
ASTM D 2265 |
Viscosity of Oil CST at 40°C CST at 100°C SUS at 100°F SUS at 210°F |
490 30 1100 114 |
500 35 2400 215 |
ASTM D 445 |
|
|
|
|
EP and Wear Protection Four Ball Wear Test, Scar dia.,
mm, max Four Ball EP Weld Load, kg Load Wear Index |
0.65 250 2800 min |
0.80 250 2800 min |
ASTM D 2266 ASTM D 2596 |
Corrosion Prevention, Rust Test Emcor/SKF Water Wash Test, IP 220 modified Water Washout, 90°C (175°F), wt
% |
Pass 0/0 1 |
Pass 0/0 1 |
ASTM D 1743 ASTM D 1264 |
Bomb Oxidation, psi loss,
100hr, 210°F |
2 |
2 |
ASTM D 942 |
Bomb Oxidation, psi loss,
500hr, 210°F |
4 |
4 |
ASTM D 942 |
Available Packs: 5, 18, 180 Kg