SYF 990 COMPRESSORPLUS FG
Food Grade Synthetic Compressor Fluid (NSF
Certified, Category H1)
Product
Description
SYF
990/COMPRESSORPLUS FG are special compressor oils developed for the
food-processing and pharmaceutical industries. They are fully synthetic and can
be mixed with mineral oil as well as other synthetic hydrocarbon oils. SYF
990/COMPRESSORPLUS FG offer very good oxidation stability due to the synthetic
base oil, thus minimizing oxidation residues in the compressors and extending
oil change intervals and the service life of oil filters and separators. SYF
990/COMPRESSORPLUS FG are NSF H1 registered and therefore comply with FDA 21
CFR § 178.3570. The lubricants were developed for incidental contact with
products and packaging materials in the food-processing, cosmetics,
pharmaceutical or animal feed industries. The use of SYF 990/COMPRESSORPLUS FG can
contribute to increase reliability of your production processes. We nevertheless
recommend conducting an additional risk analysis, e.g. HACCP.
Application
·
SYF 990/COMPRESSORPLUS FG can be used as vacuum pump oils,
evacuating air or inert gases if a food grade oil is required.
·
SYF 990/COMPRESSORPLUS FG can be used for oil-injected screw-type
compressors, reciprocating piston compressors and rotary vane compressors.
·
SYF 990/COMPRESSORPLUS FG are intended for use in compressors of
the food-processing and pharmaceutical industries requiring oil-free compressed
air (without oil vapour, which cannot be removed by the oil separator).
·
These oils are also suitable for gear lubrication in oil-free
screw type compressors.
Benefits
· SYF 990/COMPRESSORPLUS FG are NSF H1 registered for use in the
food-processing and pharmaceutical industries and comply with FDA 21 CFR Sec
178.3570
· Low maintenance and
operating costs due to extended oil change intervals up to 5,000 operating
hours1 in oil injected screw-type compressors
·
Easy compressor conversion from mineral to the synthetic SYF
990/COMPRESSORPLUS FG due to miscibility and compatibility with common seal
materials2
·
Low tendency to evaporation and thus low impact of the oil vapour
on the compressed air
·
Longer service of oils filters, activated carbon filters and oil
separators
·
Excellent demulsifying behavior and hence good water separation
ability