SYG-1050
SYG-1050
Synthetic High Temperature Grease
Product Description
SYG-1050
is
manufactured from a synthesized hydrocarbon fluid and a non soap thickener with
Molybdenum Disulphide. It offers outstanding performance over wide temperature
ranges, with the excellent retention and
resistance to high-temperature degradation. In addition, it resists
water washing, provides superior load-carrying ability, reduces frictional
drag, and prevents excessive wear. Other tests show that SYG-1050 prevents
friction oxidation (fretting) and lubricates rolling element bearings under
conditions of high speeds and temperatures. It has also shown superior ability
to lubricate heavily loaded sliding mechanisms, such as wing flap screw jacks.
SYG-1050
is
designed for the lubrication of plain and rolling bearings at low to high
speeds, and splines, screws, worm gears, and other mechanisms where high
friction reduction, low wear, and low lubricant friction losses are required.
It provides minimum resistance to starting at extreme low temperatures (down to
-54°C/-65°C) as well as low running torque. SYG-1050 is recommended for blower fans of Bakery Ovens., it can
also be used on naval shipboard auxiliary machinery. SYG-1050 also is recommended for industrial lubrication, including
sealed or re-pack able ball and roller bearings wherever extreme temperature
conditions, high speeds, or water washing resistance are factors. Typical
industrial applications include conveyor bearings, small alternator bearings,
high-speed miniature ball bearings, and bearing applications where oscillatory
motion, and vibration create problems.
Features
and Benefits
Improved friction
reduction, Low wear rates, low lubricant drag, wide temperature range, high
thermal stability, compatibility with mineral-oil-base greases, extreme
pressure characteristics, and high resistance to water washing
Typical
Properties
SYG-1050 |
|
Thickener Type |
Inorganic |
Fluid Type |
Synthetic
Hydrocarbon |
Colour, Visual |
Visual Grey |
Structure |
Smooth, buttery |
NLGI Grade |
1.5/2 |
Penetration, ASTM D 217, |
25°C |
60 Strokes |
270 |
Temperature Range |
>300°C |
Dropping point, °C, ASTM D 566, IP
132 |
310°C |
Corrosion Prevention, ASTM D 1743 |
Pass |
Load Wear Index, ASTM D 2596, kg |
30 |
Copper corrosion, ASTM D 130, 24 HR AT
100°C |
None |
Water Washout, ASTM D 1264,38°C |
1 |
Four-Ball Wear Test, 40 kg at 75°C, 1200
rpm,1hr scar Diam, mm,ASTM D 2266,max |
1.3 |
Evaporation loss ,ASTM D 972,22 HR AT
177°C,WT % |
10 |
Oil separation,30 hr at 177°C,vol% |
5 |
Available Packs: 5, 18
& 180 Kg