SYG 4230
SYG
4230
Ultra
High Speed Grease
Product Description
SYG- 4230 is a
high-speed grease with a good pressure absorption capacity. It consists of a
combination of ester oil, synthetic hydrocarbon oil and mineral oil and a
barium complex soap. It offers good protection against wear and corrosion and
is resistant to water, media and oxidation.
– Tried and tested over many years especially in
high-speed applications
– Longer component life due to optimized wear
protection and good pressure absorption capacity
– Excellent resistance to water and media as
well as above-average anticorrosive additives protect bearings against
– premature failure, thus helping to minimize
repair costs
– Low intrinsic bearing heat due to low
lubricant friction enabling longer service life
– Uninterrupted machine operation due to good
pumpability and metering in customary centralized lubricating systems
Applications
SYG-
4230 is primarily used for
spindle bearings and high-speed plain bearings, e.g. in machine tools and
textile machines.Further applications are in threaded spindles, ball screws operating
under high loads, running gear bearings, as a long-term grease in cableway
bearings and in precision engineering. It may also be used for the lubrication
of tooth flanks in precision gears (e.g. bevel gears in milling machines,
electromechanical valve actuators).
Typical
Properties
SYG
4230 |
|
Upper
service temperature |
130°C |
Lower
service temperature |
-40°C |
Worked
penetration, acc. to Klein, 25°C, upper limit value |
295 0,1 mm |
Worked
penetration, acc. to Klein, 25°C, lower limit value |
265 0,1 mm |
Speed
factor (n x dm) |
approx. 1 000 000
mm/min |
Kinematic
viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40°C |
21 mm²/s |
Kinematic
viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100°C |
4.5 mm²/s |
Shear
viscosity at 25°C, shear rate 300 s-1, equipment: rotational viscometer,
upper limit value |
8 000 mPas |
Shear
viscosity at 25°C, shear rate 300 s-1, equipment: rotational viscometer,
lower limit value |
4 000 mPas |
Drop
point, DIN ISO 2176 |
> 220°C |
Corrosion
inhibiting properties DIN 51802, (SKF-EMCOR), test duration: 1 week,
distilled water |
<= 1 corrosion
degree |
Colour
space |
beige |
Density
at 20°C |
0.99 g/cm³ |
Texture
|
homogeneous |
Texture |
short-fibred |
Available
Packs : 5, 18, 180 Kg