SYG 1170 WATER RESISTANT HI LOAD GREASE
Product Description
SYG 1170 is
high performance, extreme-pressure grease which combines a synthetic base (Polyalkylene
glycol) fluid with a lithium complex soap thickener. The thickener system
provides a high dropping point, excellent resistance to water wash, and a
tenacious structural stability. The unique physical properties of the synthetic
base oil, combined with selective additives, provide outstanding protection
against wear, rust, corrosion, and high temperature degradation. The waxfree
feature of the synthetic base oil allows for low-temperature mobility/pump
ability and very low starting and running torque values. Also, the traction
property of the synthetic base fluid in these greases is considerably lower
than mineral oil, allowing for temperature reductions in the load zone of
rolling element bearings.
Applications
This grease therefore is ideal
grease for high load, water and heat resistant applications where there is a
combination of very high loads and a possibility of presence of water as in
drying range machine cylinder bearings. It is adhesive grease, resistant to
steam, good pressure absorption capacity. Also suitable as a valve and sealing
grease for plain and rolling bearings operating at low speeds.
Benefits
·
High
resistance to wear.
·
Reduced
power loss due to very low coefficients of friction.
·
Excellent
adhesion – reduced lubricant consumption.
·
Not washed
away by water, compatible with boiling water.
·
Very good
protection against corrosion, excellent aging resistance.
·
Non-toxic in
food processing machinery.
·
Low
evaporation at high temperatures.
·
Suitable for
all direct or indirect types of heating.
Typical Properties
PROPERTIES |
VALUES |
Base Oil |
Synthetic, PAG |
Operating
Temperature |
-40°C to +145°C |
Thickener
Type |
Lithium Complex |
Colour |
Ivory |
Dropping
Point, ASTM D 2265 |
> 250°C |
Penetration,
Worked 25⁰C ASTM D 217 |
415-425 |
Viscosity
of Oil, ASTM D 445 cSt @ 40⁰C |
220 |
Viscosity
of Oil, ASTM D 445 cSt @ 100⁰C |
30 |
Timken OK
Load, ASTM D 2509, lbs |
40 |
Corrosion
Prevention, ASTM D 1743 |
Pass |
Water
washout 79°C wt. %, max, ASTM D 1264 |
5.5 |