SYG-1365/460 SYNTHETIC GREASE-00
Product Description
SYG-1365
is a high performance, extreme-pressure greases which combine a synthetic base
fluid with a lithium complex soap thickener. The thickener system provides a
high dropping point, excellent resistance to water wash, and a tenacious
structural stability. The unique physical properties of the synthetic base oil,
combined with selective additives, provide outstanding protection against wear,
rust, Corrosion and high
temperature degradation. The wax-free feature of the synthetic base oil allows
for low temperature mobility/pump ability and very low starting and running
torque values. Also, the traction property of the synthetic base fluid in these
greases is considerably lower than mineral oil, allowing for temperature
reductions in the load zone of rolling element bearings
Applications
SYG-1365 grease is recommended for industrial applications at both high and low temperatures. It will provide outstanding bearing protection under heavy loads at low to moderately high speeds, and where water is a factor. SYG-1365 has performed extremely well in steel mill and paper mill applications. It also has proven exceptional severe service automotive chassis grease.
Benefits
·
SYG-1365 synthetic
greases provide the following advantages when compared with mineral oil greases
intended for similar services.
·
Operating range of -40°C to +240°C.
·
Excellent Resistant to rust, corrosion and
oxidation.
·
Outstanding structural stability in the
presence of water.
·
Excellent wear protection under heavy loads
and high temperature.
·
Power saving capabilities.
·
Extended re lubrications intervals.
·
Low volatility.
Typical
Properties
SYG-1365
00
Soap Type
Lithium Complex
Structure, Visual
Smooth, Slight Tack
NLGI
00
Color, Visual
Red
Penetration, Worked
415
Dropping Point °C
250
Viscosity of Base
Oil
CST at 40°C
460
CST at 100°C
46.5
FZG Gear Test Failure Stages passed
12+
Timken OK Load, kg
27.2
4-Ball Wear, Scar mm
0.6
4-Ball Weld Load, Kg
250
SYG-1365
00
Soap Type
Lithium Complex
Structure, Visual
Smooth, Slight Tack
NLGI
00
Color, Visual
Red
Penetration, Worked
415
Dropping Point °C
250
Viscosity of Base
Oil
CST at 40°C
460
CST at 100°C
46.5
FZG Gear Test Failure Stages passed
12+
Timken OK Load, kg
27.2
4-Ball Wear, Scar mm
0.6
4-Ball Weld Load, Kg
250