SYNTHETIC COPPER CONDUCTIVE GREASE

Product Description

Electrically conductive Grease is used for improving electrical connections between sliding surfaces and parts. Conductive grease typically serves as a ground to provide excellent Electric channeling.
COPPER CONDUCTIVE GREASE is a premium low friction, electrically conductive grease based on micro size amorphous copper and other proprietary solid lubricants with non- melting high temperature apart from new generation oxidation and H2S inhibitors. 

Applications & Usages

COPPER CONDUCTIVE GREASE is free from lead and aluminum and does not carbonize at high temperature up to 1100°C. It is recommended for stainless steel application above 360°C it performs well on similar and dissimilar metals. It provides rust, Corrosion protection while preventing seizing, galling, pitting, galvanic action and thread distortion. It is impervious to water, electrically conductive and offers protection from steam acids, caustic and harsh chemicals.
It is supplied ready to use to apply by brush, swab, or hand or grease gun. It is excellent for ground connections, rotating connections, rotary switches, variable capacitors, roller inductors, roller bearings, slip rings, slide connecters and potentiometers. 

Benefits

·        Reduces mechanical wear. 

·        Lubricates, reduces contact resistance, repels moisture, inhibits corrosion, and prevents static buildup. 

·        Ensures electrical contact between loose or vibrating parts. 

·        Improves electrical connections between irregular, pitted or corroded surfaces. 

·        Economical way to protect switches. 

Uses  

 Clean and dry the surface before use. Apply a thin, even layer of grease using a spatula or other appropriate applicator

Typical Properties

COPPER CONDUCTIVE GREASE
Appearance	Smooth Grease
Color	Dark Copper
Specific Gravity	1.2 ± 0.1
Kinematic Viscosity @40°C	1000
Operating Temperature	> 1100°C
Drop Point	None
NLGI	2
Worked Penetration	265-295
Copper Strip Corrosion, ASTM D 130	1a
4 Ball Weld Load ASTM D2509	> 800 Kg
Brush ability	Up to -12°C
Four ball Wear solids	0.4mm
Oil Separation	< 2.5 %
Friction Factor	1.1 (as per API RP 7A1)
Wear scar under 800N load	1.08
Coefficient of friction  Press-Fit test m	0.10,
SKF EMCOR method   Degree of corrosion	0