OGCPLUS-5000
HEAVY DUTY LOAD CARRYING GREASE FOR LARGE OPEN GEARS
Product Description
OGCPLUS high-performance water-resistant lubricating grease
formulated with finely dispersed graphite which delivers EP properties. It is
based on unique thickener chemistry with excellent adhesion and resistance to
"fling-off" under extreme conditions.
Application
OGCPLUS is designed for the lubrication of large, slow to medium speed, heavily loaded gears in heavy-duty applications. NLGI 1 grade is suitable to prime the surfaces of newly assembled open gears to provide lubrication during initial turning. NLGI 00 can conveniently applied by spray on gear teeth. Also suitable for use in a wide variety of industrial sectors including mining industries, including those that operate at high temperatures, for example, ring gears on cement kilns and ball mills steel, cement, paper, and chemical applications.
Benefits
- Reliable lubricant film formation over wide range of service
temperatures -10 to 150 ⁰C.
- Thick, high pressure
lubricant film owing to high viscosity base oil.
- Special additive package
for low consumption rate.
- Forms a 'dry', dust-repellant lubricating film up to 500 ⁰C.
- Superior protection against wear and reduced gear replacement costs
Typical Properties
Appearance/Colour |
Visual |
Smooth/Greyish |
|
Thickener |
N.A |
Aluminum Complex |
|
Base Oil Kinematic Viscosity @40⁰ C, cSt @100⁰ C, cSt |
ASTM D-445 |
4800-5200 800 |
|
Worked Penetration @250°C,(60x) |
ASTM D-217 |
310-340 |
400-430 |
Dropping Point, ⁰C (min) |
ASTM D-2265 |
250 |
180 |
Corrosion Prevention,
Rating |
ASTM
D-1743 |
Passes |
|
Solid Lubricant |
N.A |
Yes (graphite) |
|
Four-Ball Wear Test,Scar Diameter, mm |
ASTM
D-2266 |
0.5 |
0.5 |
4-Ball Extreme Pressure Test, Weld Point, kgf, |
ASTM D-2596 |
800 |
800 |
Working Temperature Range°C |
FZG Test |
-10 to 150 |
-10 to 140 |