SYG-1368 SYNTHETIC LITHIUM GREASE WITH MOLY
Product Description
SYG-1368
is high performance, extreme-pressure greases which combine a synthetic base
fluid with a lithium complex soap thickener, with Molybdenum Disulphide and
graphite. The thickener system provides a high dropping point, excellent
resistance to water wash, and a tenacious structural stability. The unique
physical properties of the synthetic base oil, combined with selective
additives, provide outstanding
protection
against wear, rust, corrosion and high temperature degradation. The wax-free
feature of the synthetic base oil allows for low temperature mobility/pump
ability and very low starting and running torque values. Also, the traction
property of the synthetic base fluid in these greases is considerably lower
than mineral oil, allowing for temperature reductions in the load zone of
rolling element bearings.
Application:
SYG-1368 is recommended for
industrial applications which need a lubricant that can perform normal
functions yet go far beyond in terms of high and low temperatures and long-life
performance. It is an NLGI Grade 2 grease having the cold temperature pumping
resistance of most NLGI Grade 0 greases. It is a true wide temperature, multi
service grease. SYG-1368/460 an NLGI Grade 1 ½ grease, is recommended for
industrial applications at both high and low temperatures. It will provide
outstanding bearing protection under heavy loads at low to moderately high
speeds, and where water is a factor. SYG-1368 has performed extremely well in
steel mill and paper mill applications. It also has proven exceptional
severe service automotive chassis grease.
ADVANTAGES:
SYG-1368 synthetic greases
provide the following advantages when compared with mineral oil greases
intended for similar service
Operating
range of -40° C to + 240° C
·
Excellent resistance to rust, corrosion and oxidation
·
Outstanding structural stability in the presence of water
·
Excellent wear protection under heavy loads and high temperatures
· Power
saving capabilities
·
Extended relubrication intervals
· Low volatility
Typical Properties
SYG-1368 |
|
460 |
Test Method |
NLGI
GRADE |
2 |
1 ½ |
|
Soap
Type |
|
||
Structure,
Visual |
Smooth, Slight Tack |
||
Color,
Visual |
|
||
Penetration,
Worked x
60 strokes x
10,000 strokes x
100,000 strokes |
280 295 330 max. |
305 322 334 |
ASTM D 217 |
Dropping
Point °C (°F) |
246 (475) |
246 (475) |
ASTM D 2265 |
Viscosity
of Oil CST
at 40°C CST
at 100°C SUS
at 100°F SUS
at 210°F |
490 30 1100 114 |
500 35 2400 215 |
ASTM D 445 |
|
|
|
|
EP
and Wear Protection Four
Ball Wear Test, Scar dia., mm, max Four
Ball EP Weld Load, kg Load
Wear Index |
0.65 250
2800 min |
0.80 250
2800 min |
ASTM D 2266 ASTM D 2596 |
Corrosion
Prevention, Rust Test Emcor/SKF
Water Wash Test, IP 220 modified Water
Washout, 90°C (175°F), wt % |
Pass
0/0 1 |
Pass
0/0 1 |
ASTM D 1743
ASTM D 1264 |
Bomb
Oxidation, psi loss, 100hr, 210°F |
2 |
2 |
ASTM D 942 |
Bomb Oxidation,
psi loss, 500hr, 210°F |
4 |
4 |
ASTM D 942 |