SYG-1365/220 SYNTHETIC GREASE
Product Description
SYG-1365 is high performance, extreme-pressure greases which combine a synthetic base fluid with a lithium complex soap thickener. The thickener system provides a high dropping point, excellent resistance to water wash, and a tenacious structural stability. The unique physical properties of the synthetic base oil, combined with selective additives, provide outstanding protection against wear, rust, corrosion and high temperature degradation. The wax-free feature of the synthetic base oil allows for low temperature mobility/pump ability and very low starting and running torque values. Also, the traction property of the synthetic base fluid in these greases is considerably lower than mineral oil, allowing for temperature reductions in the load zone of rolling element bearings.
SYG-1365 NLGI Grade-2 grease is recommended for industrial applications at both high and low temperatures. It will provide outstanding bearing protection under heavy loads at low to moderately high speeds, and where water is a factor. SYG-1365 has performed extremely well in steel mill and paper mill applications. It also has proven exceptional severe service automotive chassis grease
Features and Benefits
·
SYG-1365 synthetic greases provide the following advantages when
compared with mineral oil greases intended for similar services
·
Operating range of -40°C to +275°C
·
Excellent Resistant to rust, corrosion and oxidation.
·
Outstanding structural stability in the presence of water.
·
Excellent wear protection under heavy loads and high temperature
·
Power saving capabilities
·
Extended re lubrications intervals
· Low volatility
Typical Properties
|
|
Test Method |
NLGI GRADE |
2 |
|
Soap Type |
Lithium
Complex |
|
Structure, Visual |
Smooth,
Slight Tack |
|
Color, Visual |
White |
|
Penetration, Worked |
265-295 |
ASTM
D 217 |
Dropping Point °C (°F) |
270(518) |
ASTM
D 2265 |
Viscosity of Oil |
|
ASTM
D 445 |
CST at 40°C |
220 |
|
CST at 100°C |
33 |
|
EP and Wear Protection |
|
|
Four Ball Wear Test, Scar dia., mm, max |
0.8 |
ASTM
D 2266 |
Four Ball EP Weld Load, kg |
250 |
ASTM
D 2596 |
Load Wear Index |
49 |
|
Corrosion Prevention, Rust Test |
Pass |
ASTM
D 1743 |
EMCOR/SKF
Water Wash Test, IP 220 modified |
0/0 |
ASTM
D 1264 |
Water Washout, 79°C (175°F), wt. % |
3 |
|
Bomb Oxidation, psi loss, 100hr, 210°F |
2 |
ASTM
D 942 |
Bomb Oxidation, psi loss, 500hr, 210°F |
4 |
ASTM
D 942 |
Weld Load (Min in Kg) |
|
250 |