SYG-1050 SYNTHETIC HIGH TEMPERATURE GREASE
Product Description
SYG-1050 is manufactured from a synthesized
hydrocarbon fluid and a non soap thickener with Molybdenum Disulphide. It offers
outstanding performance over wide temperature ranges, with the excellent
retention and resistance to high-temperature degradation. In addition, it
resists water washing, provides superior load-carrying ability, reduces
frictional drag, and prevents excessive wear. Other tests show that SYG-1050
prevents friction oxidation (fretting) and lubricates rolling element bearings
under conditions of high speeds and temperatures. It has also shown superior
ability to lubricate heavily loaded sliding mechanisms, such as wing flap screw
jacks.
SYG-1050 is designed for the lubrication of plain
and rolling bearings at low to high speeds, and splines, screws, worm gears,
and other mechanisms where high friction reduction, low wear, and low lubricant
friction losses are required. It provides minimum resistance to starting at
extreme low temperatures (down to -54°C/-65°C) as well as low running torque.
SYG-1050 is recommended for blower fans of Bakery Ovens., it can also be used
on naval shipboard auxiliary machinery. SYG-1050 also is recommended for
industrial lubrication, including sealed or re-pack able ball and roller
bearings wherever extreme temperature conditions, high speeds, or water washing
resistance are factors. Typical industrial applications include conveyor
bearings, small alternator bearings, high-speed miniature ball bearings, and
bearing applications where oscillatory motion and vibration create problems.
Features
and Benefits
Improved friction reduction, Low wear rates, low lubricant drag, and wide temperature range, and high thermal stability, compatibility with mineral-oil-base greases, extreme pressure characteristics, and high resistance to water washing
Typical Properties:
SYG-1050 |
|
Thickener Type |
Inorganic |
Fluid Type |
Synthetic Hydrocarbon |
Colour, Visual |
Visual Grey |
Structure |
Smooth, buttery |
NLGI Grade |
2 |
Penetration, ASTM D 217, |
25°C |
60 Strokes |
270 |
Temperature Range |
>300°C |
Dropping point, °C, ASTM D 566, IP 132 |
NIL |
Corrosion Prevention, ASTM D 1743 |
Pass
|
Load Wear Index, ASTM D 2596, kg |
30 |
Copper corrosion, ASTM D 130, 24 HR AT 100°C |
None |
Water Washout, ASTM D 1264,38°C |
1 |
Four-Ball Wear Test, 40 kg at 75°C, 1200 rpm,1hr scar Diam, mm,ASTM D
2266,max |
1.3
|
Evaporation loss ,ASTM D 972,22 HR AT 177°C,WT % |
10
|
Oil separation,30 hr at 177°C,vol% |
5
|