SYG-1950 MOLY PASTE
METAL FREE ANTI-SEIZE MOLY PASTE
Product Description
A low friction assembly aid containing a synergetic mixture of solid lubricants. Assembly, press-fitting and running-in of plain bearings and sliding surfaces. Burnish thinly and evenly onto clean surface with a tint-free cloth orchamois Leather. Remove any excess paste. High surface coverage reduces friction and wear. Eliminates stick-slip. Prevents seizure, metal-to-metal contact and reduces fretting corrosion.
Recommended Usage:
·
Running-in
lubricant – for new or rebuilt equipment, such as gears, splines, journal
bearings, cams and Ways
·
Metalworking –
helps prevent galling, welding and metal pickup on tools and dies in machining,
· Stamping, and drawing operations, tube
bending, thread rolling, cold heading, swaging and forging
·
Assembly lubricant
– reduces torque in tightening threaded fasteners and tension variation from
bolt to bolt; eases disassembly and reduces chance of damage
·
Helps prevent
fretting wear and corrosion, and cold welding of bearing shafts, bushings and
splines
· Press-fitting lubricant – allows press fitting without chatter or stick-slip in most cases; reduces the force required for interference fitting and minimizes distortion.
Benefits:
•
Facilitates
disassembly, even after extended periods and after demanding and unfavorable
conditions of service
•
Metal-free
formulation avoids fastener brittleness or environmental contamination
•
With a coefficient
of friction similar to oiled bolts, tightening torques can be calculated and applied uniformly, even upon repeated
loosening and tightening, aiding in:
•
Uniform clamping
force on flanges, valves, housings, etc.
•
Increased safety
against bolt fractures
•
Increased safety
against loosened screws due to vibration
•
High surface
coverage reduces friction and wear.
• Prevents seizure, metal-to-metal contact and reduces fretting corrosion
SYG-1950GREASE |
|
Temperature |
-25to450 |
Color |
Black |
Specific Gravityg/cm2 |
1.4 |
SurfaceCoveragem2/kg |
40 |
Penetration(un-worked) |
280-310 |
4-ballweldload |
4800 N |
Saltspraytest,at50µm |
140hr. |