SYG-4080 SYNTHETIC, HI SPEED, WIDE TEMPERATURE RANGE GREASE
Product Description
SYG-4080, is a high-performance grease which combines a synthesized hydrocarbon base fluid with a lithium complex soap thickener. The thickener system provides a high dropping point, excellent resistance to water wash, and a tenacious structural stability. The unique physical properties of the synthetic base oil, combined with selected additives, provide outstanding protection against wear, rust, corrosion and high-temperature degradation. The wax-free feature of the synthetic base oil allows for low-temperature mobility/pump ability and very low starting and running torque values. Also, the traction property of the synthetic base fluid is considerably lower than mineral oil, allowing for temperature reductions in the load zone of rolling element bearings.
Applications
SYG-4080 is recommended for applications which need a lubricant that can perform normal functions yet go far beyond in terms of high and low temperature and long-life performance. Typical applications are high speed spindles, electrical motors in varying temperature environment, robotic equipment etc. It is a true wide-temperature, multi-service grease.
·
Operating range of -60⁰C to +225⁰C
·
Excellent resistance to rust, corrosion, and oxidation.
·
Outstanding structural stability in the presence of water.
·
Excellent wear protection under heavy loads & high temperatures.
·
Power-saving capabilities.
·
Extended relubrication intervals-Low volatility.
Typical Properties
PROPERTIES
NLGI Grade
2
Soap Type
Lithium
Complex
Structure
Smooth,
Slight Tack
Penetration ASTM D 217
290
Dropping Point, ⁰C, ASTM D 226
225
Base Oil viscosity @ 40⁰C
46
Base Oil viscosity @ 4100⁰C
7.8
Corrosion Prevention, ASTM D 1743
Pass
EMCOR /SKF Water Wash Test, IP 220
0
Water Washout, ASTM D 1264
5.5
PROPERTIES
NLGI Grade
2
Soap Type
Lithium
Complex
Structure
Smooth,
Slight Tack
Penetration ASTM D 217
290
Dropping Point, ⁰C, ASTM D 226
225
Base Oil viscosity @ 40⁰C
46
Base Oil viscosity @ 4100⁰C
7.8
Corrosion Prevention, ASTM D 1743
Pass
EMCOR /SKF Water Wash Test, IP 220
0
Water Washout, ASTM D 1264
5.5