LITHEX-2/LIFG
Product Description
LITHEX-2/LIFG is a high-performance grease, which combines a synthesized hydrocarbon base fluid with a lithium complex soap thickener .The thickener system provides a high dropping point, excellent resistance to water wash, and a tenacious structural stability .The unique physical properties of the synthetic base oil, combined with selected additives ,provide outstanding protection against wear, rust, corrosion, and high-temperature degradation .The wax-free feature of the synthetic base oil allows for low- temperature mobility/pump ability and very low starting and running torque values .Also ,the traction property of the synthetic base fluid is considerably lower than mineral oil, allowing for temperature reductions in the load zone of rolling element bearings.
Applications
LITHEX-2/LIFG
is recommended for aviation applications which
need a lubricant that can perform normal functions yet go far beyond in
terms of high and low temperature and Long-life
performance. It is NLGI Grade 2 grease having the cold-temperature pumping
resistance of most mineral oil NLGI Grade 0 greases.
Benefits
LITHEX-2/LIFG a synthetic grease provides these advantages when compared with mineral oil greases intended for similar service
·
Operating range of
-60°C to +300°C.
·
Excellent resistance
to rust, corrosion and oxidation.
·
Outstanding structural
stability in the presence of water.
·
Excellent wear
protection under heavy load sand high temperatures.
·
Power-saving capabilities.
· Extended relubrication intervals- Low volatility.
Typical Properties
LITHEX-2 |
|
NLGI GRADE |
2 |
Soap Type |
Lithium Complex |
Structure |
Smooth, Slight Tack |
Additive |
P.T.F.E.(Teflon) |
Penetrationat25°C(77°F) ASTMD217,
worked, 60 stroke |
280 |
10,000 strokes |
295 |
100,000 strokes |
305 |
Base Oil Viscosity cSt at 40°C. |
46 |
Base Oil Viscosity cSt at 100°C. |
7.8 |
Dropping Point, °C.(°F)
ASTMD2265 |
220(428) |
Four-Ball EP, Weld Load, ASTMD
2596, Kg Four-Ball EP Load Wear Index |
None |
Corrosion Prevention, ASTMD1743 |
Pass |
EMCOR/SKF Water Wash Test,
IP220 |
0 |
Water Washout, ASTM |
(175c°F) wt. %, max |