HEAT-HARDENING ANTI-FRICTION COATING 

Product Description

SYNTHCOAT-555 is used in sliding coating of metal/metal combinations with slow to moderately fast movements and moderate to high loads. It is suitable for the permanent lubrication of friction pairs with high compressive stress and low speeds, and also where, for technical reasons or because the risk of soiling is unacceptable, oil or grease cannot be used. 

Applications

Ø  SYNTHCOAT-555 is used successfully for pawls of safety cut-outs, carburetor springs, lorry coupling sleeves, toothed gears and parts of car safety belts and car-boot lock parts. 

Ø  Bolts and levers in tractors and construction machines.

Benefits

·        Combines excellent lubricating effect with good corrosion protection. 

·        High flash point, hence particularly suitable for series of production operations.

·        High compressive strength. 

·        High abrasion resistance, hence long service life.

Composition 

·        Solid lubricants 

·        Organic binders 

·        Solvents 

Typical Properties

 

SYNTHCOAT 555	RESULTS
Color	Grey-black
Density at 20°C ISO 2811, g/ml	1.11
Service temperature, ⁰C	-70 to +250
Falex pressure resistance ASTM-D2625, N	12500
LFW-1, rotating¹ ASTM-D2714	b=298000*
F = 2860N¹	p=126000*
n = 72 rpm, v = 7.9m/min¹	s=149000*
No. of revolutions to μ = 0.1	b=90000*
F = 900N¹	p=245000*
frequency = 89.5 osc/minutes	s=306000*
Corrosion protection	1B