SILICONE FREE ALUMINUM COMPLEX VACUUM GREASE

Product Description

SYG-ALVAC-32 Silicon Free Aluminum Complex Vacuum Grease is a homogenous mixture of Poly alpha olefin (PAO) oils and aerogel of Special which forms a translucent material of grease like consistency which is maintained over a wide temperature range of -40 °C to 250 °C. It does neither crack nor dry-up or separate into layers due to aging. It spreads uniformly and adheres on to dry surfaces of metals, ceramics, rubbers, PVC; electrical insulation etc. It possesses very good electrical properties of high-volume resistivity, dielectric constant and strength, low dissipation factor, high resistance to arcing and corona all of which are little effected by high humidity. It is chemically inert and nonreactive and thus does not corrode materials and, on the contrary, helps to protect and maintain the flexibility of materials made of natural or synthetic rubbers, vinyl plastics and similar materials. 

Applications

Non-oxidizing and strongly hydrophobic highly stable at a temperature of - 40 °C to 250 ° C, resistant to most chemicals and high resistance to aging. It is used in manufacture of semiconductor devices, isolators of high voltage contacts, for industrial applications as a moisture proof dielectric seal cum lubricant for ignition system, engine, battery, switchgear, battery terminal, cable connector, X-Ray, radio electric equipment’s. It also can be used as a valve and O-ring lubricant. Automatic, centralized lubrication systems. It may also be used as protective anti-rust films and as release agents on gaskets & seals of tank closures. 

Benefits

      ·        Resistant to dilute solutions of acids alkalinize and salts and have high dielectric indexes, which do not depend on temperature. Consistency and         insulating properties remain almost unchanged over a wide range of temperatures.
·        Does not form hard deposits and maintains excellent lubricating and sealing properties.
·        Very effective in the treatment of insulators and switch installations especially in heavily industrialized and coastal areas.
·        Excellent oxidation and mechanical stability. 
·        Excellent corrosion prevention characteristics.
·        Excellent adhesive properties.

Typical Properties

SYG-ALVAC 32	NLGI -2
Color	Translucent white
Appearance	Aluminum Complex
Odor	Odor less
Base	Synthetic PAO
Temp. Range	-40 to 250°C
Drop Point	275+
Penetration	270
Flash Point of Base oil	>300°C
Base oil Viscosity @ 40°C	32
Freedom from abrasive particles	No perceptible scratch on plastic test plates
Resistance to high temp.	(200+/- 5°C. for 30 hrs.)
a). Evaporative loss	2.0% (max.)
b). Oil separation	8.0% (max.)
Low temperature stability
(Appearance at -50° C.)	No crack or solidification
Water washout, ASTM D 1264,79°C,wt.%,max.	5.5
Pump ability	Fair