Product Description

CHISEL GREASE is an extreme pressure, high temperature paste fortified with a balanced blend of copper, Molybdenum disulphide and graphite with high film strength base oil. It is designed to lubricate and prevent seizure by forming plating like layer on the shaft, pins and bushings of pneumatic hydraulic hammers and breakers. Due to its solid lubricants content and high temperature thickener, it will not slide down the shank of the tool during its operation.  

Benefits

·        Stable under harsh conditions of heat, chemicals, water, vibrations etc. 

·        Prevent seizure & wear from vibratory loads. 

·        High film strength which prevents metal to metal contact & fretting corrosion. 

·        Reduces friction and wear caused by shock loading. 

·        Stays in place. 

Ø  Caution- Do not use as a Bearing Grease. 

Typical Properties

   

CHISEL GREASE	TESTMETHODS
NLGI Grade	-	2/3
Appearance/Structure	Visual	Coppery Anthracite
Type of Thickener	-	Complex Thickener
Worked Penetration @25°C, after 60 strokes, 0.1mm units.	ASTM D217	240-260
Dropping Point, ° C.	ASTM D2265	>260
Viscosity of Base oil @ 40°C, cSt	ASTM D445	>220
Solid Lubricants	-	MoS², Graphite and Copper
Operating Temperature Range, °C	-	-20°C/+1100°C