SYF-48 OGL HEAVY DUTY
FOR LARGE GIRTH GEAR OIL
Product Description
SYF-48 OGL HEAVY DUTY is a lubricant of a new generation, developed
specifically for the lubrication of medium-size to large girth gear drives. It
is based on synthetic hydrocarbons and mineral oil. It provides good adhesion,
excellent resistance to high pressure and protection against wear. This product
is suitable for use at component temperatures up to 120°C.
SYF-48 OGL HEAVY DUTY is free from bitumen, solvents, heavy metals,
chlorine and solid particles.
SYF-48 OGL HEAVY DUTY meets the
requirements of ANSI/AGMA 9005- E02 annex D-2.
Applications
SYF-48 OGL HEAVY DUTY can be used for immersion, paddle wheel, circulation and spray lubrication of large girth gear drives. Application possibilities are not restricted, neither by gear sizes nor power ratings. A peripheral speed of 10.0 m/s should not be exceeded. Such drives are found in rotary kilns, tube mills, drums and similar machinery used in the cement, lime, gypsum, mining and chemical industries and in power plants. Further applications are found in sugar and paper production as well as in marine and offshore technology.
When applied by immersion, SYF-48 OGL HEAVY DUTY is directly
transferred to the tooth flanks. You can also use the PA circulation
lubrication system to force-pump the lubricant onto the tooth flanks.
SYF-48 OGL HEAVY DUTY can also be applied via customary spray systems.
The lubricant film on the tooth flanks can be made visible by means of a UV
lamp of at least 366 nm.
Typical Properties
Parameters
Test Method
Specifications
Color
Creamish brown
Density at 20
°C
0.92 g/cm³
Kinematic viscosity, 40 °C
ASTM D- 445
16 500 mm²/s
Kinematic viscosity,100°C
ASTM D- 445
500 mm²/s
Viscosity index
DIN ISO 2909
170
Thermal stability of the lubricating film
<= 120 °C
Flash point
DIN EN ISO 2592
200 °C
FZG scuffing test, change in weight
DIN ISO 14635-1
< 0.2 mg/kWh
FZG scuffing test, scuffing load stage
DIN ISO 14635-1
> 12
Four-ball EP tester, welding load,
DIN 51350 part 2
>= 8
000
Parameters
Test Method
Specifications
Color
Creamish brown
Density at 20
°C
0.92 g/cm³
Kinematic viscosity, 40 °C
ASTM D- 445
16 500 mm²/s
Kinematic viscosity,100°C
ASTM D- 445
500 mm²/s
Viscosity index
DIN ISO 2909
170
Thermal stability of the lubricating film
<= 120 °C
Flash point
DIN EN ISO 2592
200 °C
FZG scuffing test, change in weight
DIN ISO 14635-1
< 0.2 mg/kWh
FZG scuffing test, scuffing load stage
DIN ISO 14635-1
> 12
Four-ball EP tester, welding load,
DIN 51350 part 2
>= 8
000