DRIVETRANSPLUS-80W
TRACTOR TRANSMISSION OIL
Product Description
DRIVETRANSPLUS 80W is a fine quality, high performance universal tractor transmission oil.
Applications
·
DRIVETRANSPLUS
80W is recommended for use in most modern industrial and agricultural tractor
transmissions, final drive and hydraulic systems, including oil immersed (wet)
brakes and power take-offs.
·
It is also
recommended for use as a hydraulic fluid in Hydrostatic Transmissions and where
an ISO VG 68 hydraulic fluid is required.
· DRIVETRANSPLUS 80W may be used where an SAE 80W GL-4 quality oil is recommended.
Benefits:
· Ensures increased gear wear
protection because of the selected anti-wear additives used.
· Reduced brake chatter without
compromising the friction retention necessary for brake capacity and PTO clutch
performance.
· Protection of gears and bearings
against corrosive attack at both high and low temperatures, due to specialized
corrosion inhibitors.
· Superior detergency and
dispersancy ensures that transmission and hydraulic mechanics
are kept clean and free to operate efficiently.
· Selected foam inhibitors ensure
rapid collapse of foam and rejection of entrained air.
Features:
- Extended equipment life.
- Selected oxidation inhibitors ensuring protection against the formation of sludge.
- Viscosity Index Improvers minimizes the effect of temperature on viscosity ensuring full fluid film protection under all temperature conditions.
- Excellent oxidation stability and lubricity.
- Contains corrosion, anti-wear and foam inhibitors
DRIVETRANSPLUS 80W meets the
requirements and recommended.
•
Ford ESN-M2C-134C
•
Massey Ferguson M1127, M1129A & M1135
•
John Deere – J20A/B
• International Harvester• Deutz Fahr
•
Landini
•
Allison C-3
•
Caterpillar TO-2
• JI Case MS-1206 Fluid
Typical Properties
DRIVETRANSPLUS 80W |
|
Density at 29.5°C |
0.870 |
Viscosity at 40°C mm²/s |
74.0 |
Viscosity at 100°C mm²/s |
10.0 |
Viscosity Index |
128 |
Flash
Point °C (COC) |
228 |
Pour
Point °C |
-27 |
TBN |
6.60 |