STANPLUS EP GEAR OIL -100
Product Description
STANPLUS EP lubricants are a family of industrial extreme pressure
gear lubricants. They are formulated with high quality mineral oils, which help
reduce sludge formation helping to increase oil service life. STANPLUS EP oils contain a sulphur /
phosphorus extreme pressure additive system that gives high load carrying
ability and protection against wear. In addition, these oils provide strong
protection against corrosion of steel and copper containing alloys and resist
foaming. Stan plus EP oils have good water handling properties so that water
rapidly separates from the oil for easy water elimination. STANPLUS EP oils can be used in either splash or circulating systems.
Stan plus EP gear oils are suitable for use wherever industrial gear oil is
required. Stan plus EP grades are suitable for the lubrication of heavily
loaded enclosed gear sets including spur, helical and bevel designs and provide
protection in applications where shock loading occurs. STANPLUS EP may also be
used in worm gears where specified. They may also be used for lubrication of
plain bearings, and in rolling contact (anti-friction) bearings.
Applications
STANPLUS EP gear oils are used in a wide range of industrial spur, helical, bevel steel-on-steel worm gearing and Extreme Pressure Heavy Load Gear Boxes
Benefits
·
EP wear
protection of gears and bearings.
·
Resistance to
sludge formation leads to outstanding system cleanliness.
·
Very good
oxidation resistance for long oil charge life.
·
Very good
demulsibility to ease water removal.
· Improved Equipment Reliability.
Performance Standard
·
AGMA
9005-D94
·
US STEEL 224
· David Brown S1.53 101
Typical Properties
STANPLUS EP 100 |
|
ISO VG Grade |
100 |
Kinematic
Viscosity cSt @ 40⁰C |
100 |
Kinematic
Viscosity cSt @ 100⁰C |
15 |
Viscosity Index |
157 |
Pour Point, ⁰C,
ASTM D 97 |
-48 |
Flash Point, ⁰C,
ASTM D 92 |
252 |
Rust Protection |
Pass |
Density @ 29⁰C
kg/m3, ASTM D 1298 |
847 |
Foam Seq I, Seq
II, Seq III |
+0/0,
0/0, 0/0 |
Copper Corrosion |
1A |
FZG, Pass Stage |
12 |
Four Ball Wear
Scar, mm |
0.28 |
Weld Load kg. |
290 |
Channel Point, ⁰C,
AGMA Number |
-50, 3EP |