SYF-48 OGL HEAVY DUTY
FOR LARGE GIRTH GEAR OIL
Product Description
SYF-48 OGL HEAVY DUTY is a lubricant of a new generation, developed specifically for the lubrication of medium-size to large girth gear drives. It is based on synthetic hydrocarbons and mineral oil. It provides good adhesion, excellent resistance to high pressure and protection against wear. This product is suitable for use at component temperatures up to 120°C.
SYF-48 OGL
HEAVY DUTY is free from bitumen, solvents, heavy metals, chlorine and solid
particles.
Applications
SYF-48 OGL HEAVY DUTY can be used for immersion, paddle wheel, circulation and spray lubrication of large girth gear drives. Application possibilities are not restricted, neither by gear sizes nor power ratings. A peripheral speed of 10.0 m/s should not be exceeded. Such drives are found in rotary kilns, tube mills, drums and similar machinery used in the cement, lime, gypsum, mining and chemical industries and in power plants. Further applications are found in sugar and paper production as well as in marine and offshore technology.
When
applied by immersion, SYF-48 OGL HEAVY DUTY is directly transferred to the
tooth flanks. You can also use the PA circulation lubrication system to
force-pump the lubricant onto the tooth flanks.
SYF-48 OGL
HEAVY DUTY can also be applied via customary spray systems. The lubricantfilm
on the tooth flanks can be made visible by means of a UV lamp of at least 366
nm.
Typical Properties
|
Parameters |
Test Method |
Specifications |
|
Color |
|
Creamish brown |
|
Densityat20°C |
|
0.92g/cm³ |
|
Kinematicviscosity,40°C |
ASTMD-445 |
16500mm²/s |
|
Kinematicviscosity,100°C |
ASTMD-445 |
500mm²/s |
|
Viscosityindex |
DINISO2909 |
170 |
|
Thermalstabilityofthelubricatingfilm |
|
<=120°C |
|
Flashpoint |
DIN EN
ISO 2592 |
200°C |
|
FZGscuffingtest,changeinweight |
DINISO14635-1 |
<0.2mg/kWh |
|
FZGscuffingtest,scuffingloadstage |
DINISO14635-1 |
>12 |
|
Four-ballEPtester,weldingload, |
DIN51350 part2
|
>=8000 |
