HYDROPLUS AW SERIES 220-680
Product Description
HYDROPLUS Hydraulic AW Series are premium
high-performance oils intended for industrial and HYDROPLUS service where anti-wear
lubricants are required. The HYDROPLUS Hydraulic AW Series oils are designed to
satisfy the performance requirements for a wide range of hydraulic components
in systems subjected to high-pressure, high-temperature operating environments.
Their high level of resistance to oxidation and good thermal stability
characteristics helps reduce deposit formation and help prevent sluggish system
operation. They provide good protection against rust and corrosion in high
humidity operations or where low levels of moisture are unavoidable. They
separate water readily and have very good air release properties. These
products meet the performance requirements of a wide range of hydraulic system
and component OEM's and are compatible with the pump and component metallurgy
used by various manufacturers.
The HYDROPLUS Hydraulic AW Series oils are
formulated with high quality base stocks and a carefully selected additive
system that result in finished products that provide many desirable features to
improve and prolong equipment life. They are designed to work with systems
operating under moderate to severe conditions where a high level of anti-wear
protection is needed, yet they are suitable for use in many systems where
non-anti-wear hydraulic oils are generally recommended.
The HYDROPLUS Hydraulic AW Series oils
provide outstanding performance in a range of equipment operating under
moderate to severe conditions. Their excellent oxidation resistance allows
extension of oil and filter change intervals while assuring clean systems.
Their high level of anti-wear protection and excellent film strength
characteristics result in exceptional equipment performance that not only
results in fewer breakdowns but helps improve production capacity. Their
controlled demulsibility permits the oils to work well in systems contaminated
with small amounts of water yet readily separate large amounts of water.
Performance Standard
IS 10522: 1983
DIN 51524 Part 2
Dennison HF -2
Vickers I-286-S
Benefits
·
Advance anti
wear performance.
·
Better
surface properties reduce oil carryover.
·
Good liquid
and vapour phase rust protection.
· Provider long stand equipment life extends filter life.
Typical Properties
PROPERTIES |
TEST
METHOD |
HYDROPLUS
AW 220 |
HYDROPLUS
AW 320 |
HYDROPLUS
AW 460 |
HYDROPLUS
AW 680 |
ISO Viscosity Grade |
|
220 |
320 |
460 |
680 |
cSt @ 40⁰C |
|
216.4 |
321 |
461 |
682 |
cSt @ 100⁰C |
|
18.72 |
24 |
31 |
39.2 |
Viscosity
Index (min) |
ASTM D 2270 |
96 |
95 |
96 |
96 |
Rust
Characteristics |
ASTM
D 665B |
Pass |
Pass |
Pass |
Pass |
Pour
Point, ⁰C, (max) |
ASTM D 97 |
-6 |
-6 |
-6 |
-9 |
Flash
Point, ⁰C, (min) |
ASTM
D 92 |
240 |
|