SYG-1380 NON MELTING GREASE
Product Description
SYG-1380 is manufactured from a
synthesized hydrocarbon fluid and a non soap thickener with Molybdenum
Disulphide. It offers outstanding performance over wide temperature ranges,
with the excellent retention and resistance to high-temperature degradation. In
addition, it resists water washing, provides superior load-carrying ability,
reduces frictional drag, and prevents excessive wear. Other tests show that
SYG-1380 prevents friction oxidation (fretting) and lubricates rolling element
bearings under conditions of high speeds and temperatures. It has also shown
superior ability to lubricate heavily loaded sliding mechanisms, such as wing flap
screw jacks.
SYG-1380 is designed for the
lubrication of plain and rolling bearings at low to high speeds, and splines,
screws, worm gears, and other mechanisms where high friction reduction, low
wear, and low lubricant friction losses are required. It provides minimum
resistance to starting at extreme low temperatures (down to -54°C/-65°C) as
well as low running torque. SYG-1380 is recommended for use in landing wheel
assemblies, control systems and actuators, screw jacks, servo devices,
sealed-bearing motors, oscillating bearings, marine, marine blowers and
helicopter rotor bearings on military and civil aircraft. Subject to equipment
manufacturer approvals, it can also be used on naval shipboard auxiliary
machinery. SYG-1380 also is recommended for industrial lubrication, including
sealed or re-pack able ball and roller bearings wherever extreme temperature
conditions, high speeds, or water washing resistance are factors. Typical
industrial applications include conveyor bearings, small alternator bearings,
high-speed miniature ball bearings, and bearing applications where oscillatory
motion and vibration create problems.
Recommended up to 375°C Temp.
Features and Benefits
Improved friction reduction, Low wear rates, low lubricant drag, wide temperature range, and high thermal stability, compatibility with mineral-oil-base greases, extreme pressure characteristics, and high resistance to water washing
Typical Properties
SYG-1380 |
|
|
Thickener Type |
Inorganic |
|
Fluid Type |
Synthetic Hydrocarbon |
|
Color, Visual |
Visual Grey |
|
Structure |
Smooth, buttery |
|
NLGI Grade |
2 |
|
Penetration, ASTM D 217, |
25°C |
|
60 Strokes |
270 |
|
Maximum Operating Temperature |
380 °C |
|
Dropping point, °C, ASTM D 566, IP 132 |
NIL |
|
Corrosion Prevention, ASTM D 1743 |
Pass |
|
Load Wear Index, ASTM D 2596, kg |
30 |
|
Copper corrosion, ASTM D 130, 24 HR AT 100°C |
None |
|
Water Washout, ASTM D 1264,38°C |
1 |
|
Four-Ball Wear Test, 40 kg at 75°C, 1200 rpm,1hr scar Diam, mm,ASTM D
2266,max |
1.3 |
|
Evaporation loss ,ASTM D 972,22 HR AT 177°C,WT % |
10 |
|
Oil separation,30 hr at 177°C,vol% |
5 |
|
Low temperature Torque, ASTM D 1478, -54°C(-65°F),after 100,000
Strokes, starting/runnin g-cm |
10,000/1,000 |
|
Rubber Swell, FTM 3603,L Type Synthetic 1week at 70°C, vol % |
6 |