CENTRAL GEAR FLUID-54/18000 cSt
Product Description
CENTRAL GEAR FLUID-54 is a polymer technology based open
gear lubricant fluid. It is fortified with high molecular weight polymers,
extreme pressure additives, and a blend of anti-oxidants and corrosion
inhibitors, combining to provide highly effective lubrication with excellent
corrosion protection. This lubricant is bitumen free.
CENTRAL GEAR FLUID-54 has been specially developed for the lubrication of all types and sizes of open gears, including spur, helical and bevel drive gears that are subjected to extreme loads, high working temperatures and water saturated conditions.
Applications
Clean the gears of previous lubricant with a suitable solvent; this will ensure good bonding of the solid lubricants in CENTRAL GEAR FLUID-54. This open gear lubricant is designed to provide specialty application by spray and dipping methods. It is not necessary for the gears to be treated to be dry of water the de watering characteristics of Central Gear Fluid-54 enable it to be applied to wet surfaces. Due to the product's high solids content, it is ideal for both running-in and service lubrication.
- Easy to apply in all
weathers.
- De waters and can be applied
to wet surfaces.
- Totally water repellent.
- Adhesive additives ensure
self-repairing film of lubricant providing maximum protection of work surfaces.
- Withstands pressures up to
7,000kg/cm2.
- (100,000psi) which reduces
wear lasting thin, almost dry lubricating film does not collect dust and dirt.
- Thin film does not drip or fling off and therefore maintains a clean surrounding work area.
Benefits
Fluid greases show a special rheological behavior: under hear, they become liquid and allow for lubrication close to that of oil. On stopping, they return to their consistency and guarantee sealing. These strongly thixo tropic phenomena are provided by the thickener. Aluminum complex greases are the products most Suited to these speed constraints.
- Reduction in energy
consumption.
- Reduction in noise
disturbance = Working environment preserved.
- Long service lifetime and protection of mechanical elements =Reduction in Maintenance costs.
Ø Caution: Do not use as a bearing grease.
Typical Properties
PROPERTIES |
VALUES |
Appearance |
Transparent |
Color |
Pale Brown |
Base oil Type |
Synthetic
Hydrocarbon- Mineral Oil |
Kinematic Viscosity @ 40⁰C, cSt |
18000 |
Kinematic Viscosity @ 100⁰C, cSt |
570
cSt |
Flash Point, COC, °C, Min |
220 |
Pour Point, ⁰C |
-15 |
Viscosity Index |
180 |
Rust Protection |
Pass |
Copper strip corrosion test |
Pass |
Four Ball Test IP-239 |
9800N/Cm2 |
Timken-Test Load/wear |
60/ ≤ 5 |
Four ball wear Test 60 minutes @ 40 kgf |
0.5 |
Service Temperature |
0 to 130⁰C |