PRINTO-FORTY
SEMI SYNTHETIC PRINTING OIL FOR ALL TYPE OF OFFSET PRINTERS
Product Description
A family of heavy duty semi synthetic (SSEP) range of lubricating oils formulated to meet the critical requirements of No-Twist Rod Mills, PRINTO- FORTY oils are suitable for all types of Morgan No-Twist Rod Mill lubrication systems for bearings, gears, adjusting screws, etc. and circulating systems for back up roll bearings of rolling mills, Print processing unit like- offset printers and printing machines. It is suitable for the applications where extreme pressure, anti- wear properties, water resistant properties along with excellent lubricity is required. PRINTO- FORTY is developed from mineral base oil, synthetic PAO and several other additives to impart EP, anti-wear, lubricity and anti-oxidant properties
Applications
Recommended for High-Speed Offset Printers.
Benefits
- This non-detergent lubricant is good for anti- corrosion.
- Good demulsibility for rapid ink & water
separation. Resistance to foaming and
good filterability.
- High oxidation stability resulting in longer lubricant
life.
- Outstanding extreme pressure load-carrying properties with
EP additives as evaluated in laboratory tests and confirmed in field service.
- Increased oxidation and thermal stability protect from
formation of sludge and deposits, even at high bulk oil temperature up to
300⁰C.
- Increased protection against rust and corrosion for metals
used in gear sets.
- Longer lubricant charge life, reduced oil change labor
costs, less down time, reduced lubricant and lubrication costs lower operating
costs, higher productivity and longer component life.
- Good for high-speed spindles.
- Water Repellant.
Typical Properties
PROPERTIES |
TEST METHOD |
VALUES |
Color |
ISO 51376 |
Red |
Base oil type |
|
PAO and Mineral |
Density, kg/cm³ |
ISO 51757 |
0.8869 |
5Kinematic Viscosity @ 40⁰C, cSt @ 100⁰C |
ASTM D 445 |
155 15.50 |
Viscosity Index |
ASTM D 2270 |
115 |
Pour Point. °C |
ASTM D 97 |
-10 |
Flash Point, °C |
ASTM D 92 |
250 |
Sulfated Ash, wt%, |
ASTM D 874 |
0 |