QUICK DRY STAMPING OIL
A SYNTHETIC,HIGHLY EVAPORATIVE FORMING AND STAMPING FLUID
Product Description
Quick Dry Stamping Fluid is a synthetic
is a highly evaporative forming and stamping fluid.
Applications
Quick Dry Stamping Fluid was specially developed for use on a variety of both ferrous and non-ferrous metals where a high level of part cleanliness is required. It provides the ultimate balance between lubrication and evaporation, protecting dies and punches whilst giving a virtually dry finished part. In the majority of cases parts may be powder coated or painted without resorting to time consuming parts cleaning or costly vapor degreasing.
Quick Dry Stamping Fluid should ideally be directly sprayed onto the punch or die during operation, but can also be applied by swab, roller or spray to blanks prior to entering the punch or press. Generally, 2-4 hours drying time (at room temperature) is sufficient to ensure a clean, dry finished part.
Benefits
- Low viscosity. Can be applied
by spray. Easy application.
- Highly evaporative. Quick
drying with minimum residue. Cleaning usually not necessary. Faster production.
Helps save time and cost of cleaning or vapour degreasing.
- Selected lubricity additives.
Good lubrication of machine tool. Helps extend tool life.
- Synthetic narrow-cut solvent.
- Lower odor than traditional products. Good operator acceptance and clean working environment.
Typical Properties
PROPERTIES |
VALUES |
Density @ 15⁰C |
0.770 |
Appearance |
Water white mobile
liquid |
Aromatic level |
<0.05% |
Flash Point, COC, °C, Min |
41 |