GRAFALMOL M-00
LUBRICANT FOR OPEN DRIVES
Product Description
GRAFALMOL
M-00 is formulated from mineral base oil containing fine particles of graphite
and Aluminum stearate as a thickener. This running-in lubricant is free from
bitumen, heavy metals, solvents and raw materials containing chlorine, and
allows to subject the friction points to well-defined wear.
GRAFALMOL M-00 is also suitable for
corrective lubrication if tooth flanks are damaged and reduces surface roughness
and improves the tooth flank quality thus contributing to a longer service
life of drives and reduced maintenance costs.
Applications
GRAFALMOL M-00, is specially formulated for applications of specific running-in of open gears in rotary kilns, tube mills, and line blenders used in the cement, lime, gypsum, mining and chemical industries.
Benefits
·
GRAFALMOL M-00 is also suitable for corrective
lubrication.
·
Contributes to a longer service life of
drives and reduced maintenance costs.
·
It is free from bitumen, heavy metals, solvents
and chlorine.
· It reduces surface roughness and improves the tooth flank quality.
Typical Properties
PROPERTIES |
|
Appearance, Visual |
Black |
Texture |
Homogeneous and long-fibred |
Solid Lubricants |
Present |
Base Oil |
Mineral |
Thermal
stability of the lubricating film
|
Up to 200 °C |
Functional
lubricant film |
Up to -30 °C |
Application
in automatic spray systems |
-15 - 90 °C |
NLGI
grade, ASTM D217 |
00 |
Kinematic
viscosity of the base oil at 40⁰C,
ASTM D-445 |
Up to 500 mm²/s |
Drop
point, ⁰C, ASTM D566 |
> 90 °C |
Density
at 20 °C, ASTM 1475 |
1 g/cm³ |
FZG
scuffing test, based on DIN ISO 14635, A/2.76/50, change in weight |
1.4 mg/kWh |
FZG
scuffing test, based on DIN ISO 14635, A/2,76/50, scuffing load stage |
> 12 |
Water
resistance, DIN 51807 pt. 01, 3 h/40°C |
0 - 40 |