SYNTHERM -1000
SYNTHETIC
HEAT TRANSFER FLUID
Product
Description
SYNTHERM-1000 is synthetic base
heat transfer fluid. It is fortified with selected chemical additives, which provide excellent
thermal and oxidation stability to ensurelonger life.
SYNTHERM-1000 has wide operating
range of -15 ºC to 325 ºC and in extreme cases at 340 ºC. Unlike mineral base
products, it does not crack at high temperature forming carbon deposits and
insoluble matter. Negligible deposits means better heat transfer rate.
Insoluble matter/sludge is kept in fine dispersion, which increases the overall
life of oil.
SYNTHERM-1000 has low freezing point (below -20 ºC), which ensures good pumpability at low temperatures and smooth operations. It's low volatility reduces oil consumption during service. Due to special AFR (anti free radical) and minimum low boilers formation characteristics, SYNTHERM-1000 has more life than conventional mineral base heat transfer oils.
SYNTHERM-1000 is recommended for
well-designed indirect heat transfer system having high bulk operating
temperatures. It gives excellent performance in high temperature heat transfer
system. It has wide range of application in textile, pharmaceuticals, plywood,
chemical and other processing industries, where there is indirect heating is an
enclosed system. SYNTHERM-1000 is compatible with any mineral base thermic/heat
transfer fluid. The product can be used for topping up however a lab
confirmation is always recommended.
·
High thermal and oxidation stability, less degradation, higher
drain period.
·
Improved heat transfer rate.
·
Excellent overall stability.
·
Low volatility results in less oil consumption.
·
Non-corrosive, non-toxic.
·
Ability to withstand at higher temperature.
·
Low temperature pumpability and circulation.
·
Overall reliable, cost effective performance even on continuous
running.
Syntherm-1000 |
|
Viscosity, ASTM D 445 |
|
cSt @ 40ºC |
22.5 |
Appearance |
Clear & Bright |
Pour Point, ºC, ASTM D 97 |
-39 |
Flash Point, ºC, ASTM D 92 |
200 |
Specific Gravity @29.5 ºC kg/l,
ASTM D 4052 |
0.867 |
Water content % Coefficient of thermal
expansion Copper strip corrosion @ 100
ºC, 3 hrs |
<0.01 0.096/ ºC 1a |