SYNTHERM-10 SPECIAL
SILICON BASE HEAT TRANSFER FULID
Product Description
SYNTHERM-10 SPECIAL is Silicon base heat transfer fluid fortified with selected chemical additives, which provide excellent thermal and oxidation stability to ensure longer life.
With the working temperature of -65 ºC to 205 ºC. SYNTHERM-10 SPECIAL is a high performance, Low-Viscosity thermic fluid manufactured with required additives to run trouble free long life. The carbon deposition is very less in this product because of its high oxidation stability and thermal stability. It works extra ordinary in close loop thermic fluid system of chemical industries as heat transfer media.
Unlike mineral base products, it does not crack at high temperature forming carbon deposits and insoluble matter. Negligible deposits mean better heat transfer rate. Insoluble matter/sludge is kept in fine dispersion, which increases the overall life of oil. SYNTHERM-10 SPECIAL has more life than conventional mineral base heat transfer oils.
Applications
SYNTHERM-10 SPECIAL is recommended for well-designed indirect heat transfer system having high bulk operating temperatures. It gives excellent performance in high temperature heat transfer system. It has wide range of application in textile, pharmaceuticals, plywood, chemical and other processing industries, where there is indirect heating is an enclosed system.
Benefits
SYNTHERM-10 SPECIAL is compatible with any mineral base thermic/heat transfer fluid. The product can be used for topping up however a lab confirmation is always recommended
- Low pour-point provides good performances at low temperature.
- Very good anti-corrosion properties in relation to ferrous and nonferrous metals
- High Co-efficient of heat transfer property benefit in fast heat transfer
- Low viscosity and viscosity index
will benefit in less load on circulation pumps.
- Very good oxidation and Thermal
stability.
- Low sludge formation, better performance of filters and control valves.
Typical Properties
SYNTHERM-10 SPECIAL |
|
|
Color |
Visual |
Water white |
Kin. Viscosity of base oil at 40 °C mm2/s(cSt) |
ASTM D445 |
10-12 |
Kin. Viscosity of base oil at 100 °C mm2/s(cSt) |
ASTM D445 |
2.39 |
Flash Point |
ASTMD D92 |
205°C |
Fire point |
ISO 2592 |
230°C |
Pour Point |
ASTMD D97 |
-65°C |
Viscosity index |
ISO 2909 |
82 |
Air release at 5°C |
ISO 9120 |
1 min |
Total Acid No. |
ASTMD D664 |
0.01 mg KOH/g |
Auto Ignition temperature |
ASTM 2155 |
260 °C |
Rust prevention test |
ISO 7120 |
Pass |
Water Content |
IS: 2362 |
0.039 % |
Density @ 15°C g/ ml |
ASTM D 4052 |
0.83 |