NEATPLUS-23
NEAT CUTTING FLUID
Product Description
NEATPLUS-23 is active type neat cutting
oil. This oil contains a sulphurised
fatty material, which improves oiliness property thus providing better surface
finish Sulphur incorporated in this oil become chemically active at the
tool-work piece-chip interface and ensures protection to the cutting tool over
a wide range of operating temperatures.
Applications
NEATPLUS-23 is recommended for most of the cutting operations on ferrous metals under severe operating conditions, which demand high degree of chemical activity in oils. This oil is suitable for machining operations on high tensile stainless steel as well as Ni-Cr alloys by automatics, gear cutting, hobbing, drilling, reaming and thread cutting machines. To obtain best results with the use of this product, it is necessary that a copious flow of oil at low pressure is maintained at the cutting area. The use of NEATPLUS-23 for cutting operation on non-ferrous metals and its contact with soft metal bushes in machines should be avoided.
Benefits
·
Provides continuous
protection to tool edges over a wide range of operating temperatures.
·
Helps in improved surface
finish due to the added oiliness property.
·
Enables machining of
tough, ductile steels in severe operations.
·
Prevents localized welding
between the chip and tool.
· Keeps at minimum, oil drag-out losses on components and swarf.
Performance Standard
·
IS: 3065-1985 (Reaffirmed
1995) Type III Grade 2.
Typical Properties
PROPERTIES |
|
Kinematic
Viscosity cSt @ 40⁰C |
28-34 |
Flash
Point, ⁰C, COC |
160 |
Copper strip corrosion, @ 100 °C, 3 hours, Max |
4 |