SWISSCUT
WATER SOLUBLE CUTTING OIL
Product Description
SWISSCUT is economical and environment- friendly, long life water-soluble oil, suitable for all moderate machining and grinding operations on all ferrous and non-ferrous metals like aluminium, steel alloys, cast iron and yellow/brown metals except titanium and magnesium. It is formulated with refined naphthenic base oil, natural emulsifiers, corrosion inhibitor package and biocides.
SWISSCUT is a specially compounded bio – stable micro emulsion cutting oil which forms a homogeneous and exceptionally stable emulsion that shows no apparent separation even after long period of usage with hard water or storage for a long time. SWISSCUT is a high molecular weight metal working fluid made out of specialty esters, rust inhibitors, biocides and EP additives. The excellent extreme pressure property provides prolonged tool life and thus increases productivity.
Benefits
- Suitable
for ferrous and non –ferrous metals.
- Longer
coolant life reduces the overall production cost.
- Built in extreme pressure properties improving
tool life.
- Micro droplet structure exhibit exceptional
emulsion stability.
- Its low
foaming character renders better component visibility and trouble-free operation.
- Reduces wheel loading and dressing frequency.
- Reduces
machine down time.
- Reduces
disposal and labor costs.
Directions for use
SWISSCUT should be diluted with water in the range of 10:1 to 60:1 depending upon the severity of the operation, work piece material and water hardness. The following practices helps in achieving the full benefits of the product.
- Always add oil to water and never the other
way.
- Usage of low hardness (< 200 PPM), Low chlorides
(< 30 PPM) water.
- Never add product directly to the sump. Add
in the emulsion form.
- Always clean the sump thoroughly before a fresh charge.
Typical Properties
PROPERTIES
TEST METHOD
SWISSCUT
Appearance
Visual
Bright& Clear
Color
-
Amber
Density, g/cm3
, @29.5 ˚C.
ASTM D5002
0.93
Kin. Viscosity, cst @
40 °C.
ASTM D 445
40
5%IN 400 ppm
IS1115
Passes
5%intapwater
IS1115
Passes
Ph Value
in 5% distilled water
IS1115
9-9.3
Copper Corrosion
ASTMD 130
1
Cold Stability
IS1115
Passes
Flash Point,
COC, ⁰C
IS1115
150
Cast Iron Corrosion
IP - 125
0/0 - 0
Refractometer factor
Internal
1.0 (+/-0.20)
Oil Content
70% minimum
PROPERTIES
TEST METHOD
SWISSCUT
Appearance
Visual
Bright& Clear
Color
-
Amber
Density, g/cm3
, @29.5 ˚C.
ASTM D5002
0.93
Kin. Viscosity, cst @
40 °C.
ASTM D 445
40
5%IN 400 ppm
IS1115
Passes
5%intapwater
IS1115
Passes
Ph Value
in 5% distilled water
IS1115
9-9.3
Copper Corrosion
ASTMD 130
1
Cold Stability
IS1115
Passes
Flash Point,
COC, ⁰C
IS1115
150
Cast Iron Corrosion
IP - 125
0/0 - 0
Refractometer factor
Internal
1.0 (+/-0.20)
Oil Content
70% minimum