ALUMINUM WIRE & BAR DRAWING LUBRICANTS

Product Description

Swiss draw is economical and environment- friendly, long life water-soluble oil, suitable for all moderate drawing operations on metals like aluminum and yellow/brown metals except titanium and magnesium. It is formulated with refined naphthenic base oil, natural emulsifiers, corrosion inhibitor package, biocides and EP additives.

Swiss draw is a specially compounded bio – stable micro emulsion drawing oil which forms a homogeneous and exceptionally stable emulsion that shows no apparent separation even after long period of usage with hard water or storage for a long time. The excellent extreme pressure property provides prolonged tool life and thus increases productivity. The protective film which remains on the wire keeps it bright and clean; there is no problem with adhesion of insulation coating.

Benefits

•            Suitable for non –ferrous metals.
•         Longer coolant life reduces the overall production cost.
•         Built in extreme pressure properties improving tool life
•            Micro droplet structure exhibit exceptional emulsion stability.
•            Its low foaming character renders better component visibility and trouble-free operation.
•         Reduces wheel loading and dressing frequency.
•            Reduces machine down time.

•         Reduces disposal and labor costs.

Directions for usage

Swiss draw should be diluted with water in the range of 10:1 to 60:1 depending upon the severity of the operation, work piece material and water hardness. The following practices helps in achieving the full benefits of the product.

•              Always add oil to water and never the other way.
•              Usage of low hardness (< 200 PPM), Low chlorides (< 30 PPM) water.
•             Never add product directly to the sump. Add in the emulsion form.

•             Always clean the sump thoroughly before a fresh charge.

Typical Properties 

PROPERTIES	TEST METHOD	VALUES
Appearance	VISUAL	Bright& Clear
Color	VISUAL	Amber
Density, g/cm3, @29.5⁰C.	ASTM D5002	0.93
Kin. Viscosity, cst @ 40 °C.	ASTM D 445	40
5%IN 400 ppm	IS1115	Passes
5%intapwater	IS1115	Passes
Ph Value in 5% distilled water	IS1115	9-9.3
Copper Corrosion	ASTMD 130	1
Cold Stability	IS1115	Passes
Flash Point, COC, ⁰C.	IS1115	150
Cast Iron Corrosion	IP - 125	0/0 - 0
Refractometer factor	Internal	1.0 (+/-0.20)
Oil Content		70% minimum +80%

 

·