SYF-990 DRAWPLUS FG-1.5
LUBRICANT FOR PUNCHES AND DIES
Product Description
SYF-990/DRAWPLUS FG oils are premium quality specialized hydrocarbon oils formulated to meet the specific requirements of metal forming. They are registered as NSF H1 and comply with FDA 21 CFR. These lubricating oils exhibit a good scuffing load capacity and good anti wear protection for rolling bearings according to FAG FE 8. The corrosion protection properties of these oils are very good as is their ageing and oxidation stability. They also have a high resistance to shear and do not foam. Designed for use in punching application, such as aluminum fin for air conditioner and refrigerator industry.
APPLICATIONS
·
Used for the
lubrication of friction points in food-processing & pharmaceutical machinery.
·
It is a High
Performance Fin Press Oil for Air Conditioners and Other Punching
·
stamping aluminum
plates
·
Press-forming
the heat exchanger aluminum fins of air conditioners
·
For heat exchanger
hair pin copper tubes bending.
· For related stamping applications in several industries.
Application notes
We recommend cleaning the oil
circulation system or flushing it with the new oil prior to using
SYF-990/DRAWPLUS FG for the first time. Especially with a view to the H1 requirements in the food processing industry, any mixing of SYF-990 DRAWPLUS FG oils with non-food-grade lubricants should be avoided.
This lubricant is registered as H1, which means that it has been designed for incidental, technically unavoidable food contact. Experience shows that it can be used for equivalent applications in the cosmetic and pharmaceutical industry under the conditions described. Specific test results as e.g. biocompatibility, which could be an additional requirement for applications in the pharmaceutical industry, are not available for this product. Therefore, before using the lubricant adequate risk analyses have to be performed and, if necessary, suitable measures be taken by the manufacturer and user of installations in order to exclude the risk of health hazards and personal injuries.
Benefits
·
Registered
as NSF H1 for use in the food-processing and pharmaceutical industries, comply
with US FDA
·
SYF-990/DRAW
PLUS FG has a significantly prolonged service life compared to mineral and
white oil due to the base oil’s excellent ageing resistance and oxidation
stability. Service intervals can be extended and in some cases even lifetime
lubrication can be achieved.
·
Good
Lubricity On Aluminum And Copper Material
·
Provides
excellent long term chemical stability.
· Extends life of metal molds during high-speed stroking, thereby increasing productivity
Typical Properties
SYF-990/DRAWPLUS FG-1.5 |
|
Appearance |
Clear
& Light |
Density, DIN
51757, at 15 °C, [kg/m3 ], approx. |
0.76 |
Kinematic viscosity, 40 °C, [mm2 /s] |
1.5 |
Flash point, COC, DIN
ISO 2592, [°C] |
60 |
Pour point, DIN ISO 3016, [°C], approx. |
-40 |
Copper corrosion test, 24 h, DIN EN 2160,
degree of corrosion |
1a |
Rust-preventing
properties on steel, DIN ISO 7120 |
Pass |