PREVENTPLUS SS 600
ROLLER BEARING RUST PREVENTIVE OIL
Product Description
These are specially selected lubricating oils, containing soluble anti-rust inhibitors, to offer high degree of corrosion prevention. These grades serve as lubricants as well as temporary protective. PREVENTPLUS SS 600 can be applied by dipping, spraying, roller coating, flow coating, flushing or circulation, but the application surface must be cleaned and dried. The protective film of these grades has lubricating properties and hence is not necessary to remove. However, if desired, the film can be removed by wiping. This product is thixotropic corrosion protective and 100% barium free.
Applications
This grade is of a viscosity similar to that of spindle oil. It offers a thin lubricating film. It is used for protection of specifically for bearing industries, steel sheets, precision and drawn tubes, exposed gearings, shafting, conveyors, roller bearing industry, deep groove roller bearings etc.
Typical Properties
PROPERTIES |
|
Appearance |
Amber, Clear Fluids |
Specific gravity @30°C |
0.900 |
Kinematic Viscosity (B-4 Cup) |
17 To 20 Seconds |
Flash Point °C |
< 145°C |
Coverage (Sq mt./ltr) |
90 |
Film Thickness (8m) |
10.4 |
Salt spray protection |
>250 hours |
Protection
·
Indoors ·
Outdoor min. |
1 ½ years 10-12 months. |
Humidity Cabinet |
>500 hours |
Condensation climate |
>60 cycles |
Fingerprint Corrosion · Hand perspiration/oil · Oil/Hand Perspiration · Corrosive effect
on MS 63 brass (24 hours at 100oC) |
OK OK OK |