PREVENTPLUS CR-517
RUST PREVENTIVE OIL
Product Description
PREVENTPLUS CR-517 is a premium performance product primarily intended as run-in or lay-up lubricant, which provides effective rust preventive films on the internal surfaces of machinery. It is particularly suitable as a run-in lubricant for diesel and gasoline engines. The oil displaces water from metal surfaces and forms strong water-resistant films on the metal surfaces to prevent rust and corrosion. Prevent plus CR-517 absorbs the water in systems into a water-in-oil emulsion so that the contact surfaces of the machinery still get satisfactory lubrication. Its high level of chemical stability and its anti-wear and detergent properties make it suitable as a high-quality short-term lubricant.
In most applications, the residual rust preventive films need not be flushed away when the assembly is filled with lubricating oil or hydraulic fluid and put back in service. However, flushing with a charge of lubricating oil to remove the product or its residual film is recommended if
- PREVENTPLUS CR-517does not provide the required
lubricant characteristics to operate the equipment at rated loads and
temperatures.
- Draining the equipment is difficult and
considerable pockets of PREVENTPLUS CR-517cannot be early removed.
- Contamination of the system oil by PREVENTPLUS
CR-517 could reduce the lubrication performance characteristics (examples; PREVENTPLUS
CR-517 could increase Freon cloud points in compressors or water-in- oil
emulsions reduce anti-wear characteristics in high pressure hydraulic systems).
- The presence of rust preventive agents reduces
the ability of the new oil to separate water in turbines and similar equipment.
Applications
- Run-in oil and lay-up oil for engines and
industrial equipment.
- Turbines that will be out of service for long
periods.
- Hydraulic systems where water is present, and
the formation of emulsions will not affect operation.
- Test calibration oil.
Benefits
PREVENTPLUS CR-517provides an excellent lubricant that also acts as rust prevention. This allows safe lay-up of equipment that will not be used immediately but may be operated intermittently at low to moderate loads for short periods of time. This product provides excellent rust preventive performance reducing any potential damage that could otherwise occur in non-operating equipment. This saves clean-up and potential rigorous flushing procedures prior to placing the equipment back in service.
·
Excellent Rust and Corrosion Protection.
·
Effective Anti-Wear Properties.
· Dual Purpose Lubricant/Rust-Preventive Nature.
Advantages and Potential Benefits
- High level of protection against rust during
seasonal lay-ups.
- Reduced clean-up time required to place equipment
back into production.
- Displaces water from metal surfaces and forms
tenacious protective films.
- Protects equipment against wear.
- Reduced costs and time for run-in, testing or
adjustment procedures.
· Eliminates unnecessary flushing and draining steps.
Typical Properties
PROPERTIES |
|
Kinematic
Viscosity, ASTM D 445 |
|
cSt @
40⁰C |
88.4 |
cSt @
100⁰C |
10.5 |
Viscosity
Index, ASTM D 2270 |
95 |
Pour
Point, ⁰C, ASTM D 97, max |
-18 |
Flash
Point, ⁰C, ASTMD 92, min |
218 |
Density
@ 15.6⁰C, gg/cc |
0.882 |