HYDROPLUS VG 10
MILD ANTI-WEAR(NON-ZINC) HYDRAULIC OIL
Product Description
HYDRO PLUS VG 10 is a premium grade, mild
anti-wear hydraulic oil specifically formulated without zinc additives. The
absence of zinc makes HYDRO PLUS VG 10 suitable for hydraulic systems using
Lucas Pumps which incorporate silver plated slipper pads, or in applications
specifying ash less hydraulic oils. HYDRO PLUS VG 10 is an extra
light oil principally used as a hydraulic fluid in telemotor control systems.
It is also suitable as spindle oil for high-speed spindles.
HYDRO PLUS VG 10 is designed for use in hydraulic
systems incorporating Lucas Pumps but will perform well in other pumps (except
the highly rated vane types, such as the Vickers Detroit V105C Models).
Applications
HYDRO PLUS VG 10 is designed for use as a
hydraulic fluid in telemeter control systems and provide the fast response
essential at all temperatures. The additives in Hydro plus VG 10 ensure high
resistance to oil thickening in service, complete protection of machined
surfaces against corrosion and the avoidance of air entrainment, which can
cause jerky movements or partial failure of hydraulic mechanism.
HYDRO PLUS VG 10 contains oxidation and
corrosion inhibitors as well as anti-foam and antiwar additives. Contamination
with other oils, especially engine oils, must be avoided due to probable
impairment of the air release, anti-foaming and demulsibility characteristics
of Hydro plus VG 10
Benefits
·
Excellent wear
protection giving long equipment life.
·
Superior oxidation
resistance and filterability ensure long oil life and lower oil cost.
·
Good filterability,
even with water contamination, ensures protection against oxidation and fouling of servo valves.
· Low viscosity and good air release properties prevent jerky movement of hydraulic systems.
Performance Standard
· DIN 51524 HL
Typical Properties
PROPERTIES |
|
GRADE |
VG 10 |
APPEARANCE, VISUAL |
C&B |
DENSITY @ 29°C
kg/L ASTM D4052 / D1298 |
0.876 |
FLASH POINT (PMCC) |
130°C |
VISCOSITY AT 40°C
ASTM D445 |
10 |
VISCOSITY AT
100°C ASTM D445 |
2.5 |
VISCOSITY INDEX ASTM D2270 |
98 |
POUR POINT, ⁰C, ASTM D 97 |
-30 |
COLOUR ASTM D1500 |
<1.0 |
TAN mg KOH/g ASTM
D664 |
0.06 |