SYF 1740 / 68 SYNTHETIC GAS COMPRESSOR FLUID
Product Description
SYF-1740/68 is a high-performance synthetic gas compressor lubricant based on a poly-alkylene glycol. It is designed for enclosed pattern gas compressors for hydrocarbon and chemical gases where the crankcase and bearings operate in a gas-filled atmosphere. Under these conditions the gas is readily soluble in mineral oil lubricants which, on dilution, suffer a significant drop in viscosity and lubricant performance. This problem can be overcome by using SYF-1740/68 in which the gases are much less soluble. SYF-1740/68 is particularly suitable for marine service on vessels carrying specialist liquefied gas cargoes.
Benefits
·
Reduced
gas solubility leading to improved wear protection, extended lubricant life,
improved compressor efficiency and Reduced foaming.
·
Multi-gas
service for a wide range of gases including vinyl chloride and butadiene. The
lubricant does not promote the Dimerisation of butadiene or generate solid
deposits.
SYF-1740/68 therefore obviates the need to change to mineral oil for butadiene compression, thus simplifying the lubricant inventory, avoiding mistakes and saving time and expense.
Applications
SYF-1740/68 is used for the following gases:
- Liquefied petroleum gases such as propane and
butane.
- Liquefied natural gases such as methane and
ethane.
- Hydrocarbon chemical gases such as ethylene, propylene and butylene.
Typical Properties
SYF 1740/150 |
VALUES |
Test Method |
Specific Gravity |
1.02 |
ASTM D 941 |
Viscosity, cSt @ 40°C |
68 |
ASTM D 445 |
Viscosity, cSt @ 100°C |
12.5 |
ASTM D 445 |
Pour Point, (°C) |
-30 |
ASTM D 97 |
Flash Point, (°C) |
260 |
ASTM D 92 |
Copper Strip Corrosion, 3 hrs. @ 212°F/100°C |
1A |
ASTM D 130 |
4-Ball Wear,
40kg, 1 hr.,
1800 RPM, (mm) |
0.75 |
ASTM D 2783 |
Weld Point, kg |
130 |
ASTM D 2783 |
Evaporation Loss, %, 300°F/149°C, 73 hrs. |
0.48 |
ASTM D 2878 |
Viscosity Index |
184 |
ASTM D 2270 |
Ferrous Metal Corrosion (Rust Test) |
|
|
Distilled Water |
Pass |
ASTM D 665A |
Synthetic Sea Water |
Pass |
ASTM D 665B |
Foam Tendency (Sequence I, II, III) |
Nil |
ASTM D 892 |