ZINC SPRAY
Product Description
PETRELPLUS ZINC SPRAY is a formulation of base fluid, zinc flakes, propellant and additives. The spray forms a fast drying, adherent protective layer of micro fine zinc flakes. On spraying, the fluid is deposited on the surface to which it is applied & the propellant (solvent if added) vaporizes
Applications
Helps
protect metal (iron or steel) from corrosion during long term exposure to
corrosive environments. Use on electrical generation, transmission and
distribution equipment including towers, transformers, light standards and
other metal and galvanized surfaces.
Benefits
·
Zinc Spray is a multipurpose product
·
Fast Drying
·
Provides a smooth, pore free primer layer
·
Good electrical conductivity, therefore also suitable
as spot welding paint
·
Adhesion to almost all metals
·
Primer for all metals parts where above average
corrosion protection is suitable
·
Can be painted over.
Caution
Do
not spray on or near naked flame or any other source of ignition, as contents
are highly flammable. It is a pressurized container, do not drop, puncture or
expose to temperature above 55 ˚ C.
Do
not spray into eyes, mucous membranes & body, in case of accident wash eyes
with clean water.
Typical
Properties
PROPERTIES
VALUES
Color
Dark Grey
Temperature Resistance
Up to 500˚ C
Moisture Absorption
No
Propellant
Butane/propane
Zinc content in dry film
92 %
Pure Zinc
>99%
Drying time at room temperature
Just dry after 8 min
After 20-30 minutes grip
After 120 min re-paintable
Dried after 48 hours
PROPERTIES
VALUES
Color
Dark Grey
Temperature Resistance
Up to 500˚ C
Moisture Absorption
No
Propellant
Butane/propane
Zinc content in dry film
92 %
Pure Zinc
>99%
Drying time at room temperature
Just dry after 8 min
After 20-30 minutes grip
After 120 min re-paintable
Dried after 48 hours
