SYF-990/LUBRICATION OIL FG-100
GENERAL,PURPOSE LUBRICATING OIL(NSF CERTIFIED,CATEGORY H1)
Product Description
SYF-990/
LUBRICATION OIL Synthetic Food Grade Lubricant is a range of non-toxic, mineral
hydrocarbon free, Its can be use as hydraulic fluids, within clean
environments. SYF-990 Lubrication Oil is a range of non-toxic, Colorless,
odorless, and tasteless food grade synthetic PAO (Polyalphaolefine) base
general purpose oil used to treat lubricating food processing machines. The
product is approved by NSF International as H1 grade Lubricant. The product
meets requirements of USDA H1* 21 CFR. (Registered by NSF (Class H1) for use
where there is potential for incidental contact with food. These products meet
the former guidelines (1998) of the US Department of Agriculture Food Safety
and Inspection Service (USDA FSIS) for H1 use (lubricant with incidental food
contact) and listed in Miscellaneous Publication No 1419 “List of Proprietary
Substances and Nonfood Compounds”. Product contains only substances permitted
under US 21 CFR 178.3570, 178.3620 and 182 for use in lubricants with
incidental food contact.)
SYF-990/
LUBRICATION OIL is Synthetic Food Grade Lubricant contain the unique extreme
pressure and load carrying performance characteristics designed to protect gear
teeth on startup and provide protection during use.
SYF-990/ LUBRICATION OIL Synthetic Food Grade Lubricant increase service intervals operate over a wide temperature range and provide excellent corrosion protection. Synthetic Food Grade Lubricant fluids are resistant to water wash off and are particularly suitable for use in wet conditions and applications where frequent wash downs occurs.
Benefits
·
Good load carrying capabilities FZG load stage 12.
·
Tenacious, non-drip film.
·
Excellent corrosion protection.
·
Good water displacing properties.
· They do not contain any natural products derived from animals, nuts or genetically modified organisms (GMOs). It is Suitable for use where vegetarian and nut-free food is prepared and do not promote the growth of bacteria or fungal organisms.
Applications
·
General purpose oil for bearings, lever and joint lubrication
·
Can use in Hydraulic systems.
·
Compressor oil for piston
compressors
·
Food Machines and food
processing technology
·
Chemical,
Food, Paper and Packing industry
· Plastic & Rubber Industries
Directions of Use
Parts, bearing or Gearboxes, hydraulic systems, compressors should be drained and flushed prior to filling, to the normal top up level with Food Grade Synthetic Lubricants.
Typical Properties
PROPERTIES |
TEST METHOD |
VALUES |
Base oil |
|
PAO |
Odor |
|
Odor less |
Color |
|
Colorless |
Flash
Point, COC, |
ASTM D-92 |
255 |
Viscosity
@ 40 °C cSt |
ASTM D45 |
97 |
Viscosity
@ 100 °C cSt |
ASTM D45 |
14 |
Viscosity
Index |
ASTM D2270 |
148 |
Pour
Point. °C |
ASTM D97 |
-45 |
Density at
29.5°C |
|
0.84 |
Service
Temperature Min/max |
|
-25°C/+135°C |