SYF-990 GEARPLUS FG
Synthetic
(PAG) Gear Oil(NSF
Certified, Category H1)
Product Description
Fully synthetic gear oil
for the lubrication of all closed toothed gears, liquid lubrication of chains,
hinges, guides, armatures, roller and plain bearings in the whole food and
beverage industry as well as in breweries, when physiologically harmless
lubricants are required. This product have excellent extreme pressure
performance, and heavily loaded toothing against Micro pitting.
Registered by NSF (Class
H1) for use where there is potential for incidental contact with food. These
products meet the former guidelines (1998) of the US Department of Agriculture
Food Safety and Inspection Service (USDA FSIS) for H1 use (lubricant with
incidental food contact) and listed in Miscellaneous Publication List of
Proprietary Substances and Nonfood Compounds”. Product contains only substances
permitted under US 21 CFR 178.3570, for use in lubricants with incidental food
contact.
Applications
For optimum effect clean
thoroughly the lubrication point first mechanically and then, before initial
filling of gears remove corrosion protection agent. Fill gear so that the
dipping teeth receive lubricant for sure. Apply sufficient amount with a brush,
dripping oiler, by dipping or central lubricating systems. Instructions of the
gear and machine manufacturer have to be observed. Re-lubrication intervals and
amount to be defined accordingly, to the service conditions.
Performance Standard: DIN 51517 PART-3, US STEEL 224.
Typical Properties
PROPERTIES |
Test
Method |
Value |
Value |
Value |
Value |
Value |
Classification |
DIN 51 502/825 |
VG 150 |
VG 220 |
VG 320 |
VG 460 |
VG 680 |
Type |
|
Synthetic Oils |
Synthetic Oils |
Synthetic Oils |
Synthetic Oils |
Synthetic Oils |
Viscosity 40°C Mm2/s 100°C Mm2/s |
DIN 51 562-1 DIN 51 562-1 |
150 14.7 |
220 20 |
320 25 |
460 31 |
680 43 |
Viscosity Index |
DIN ISO 2909 |
100 |
100 |
100 |
100 |
104 |
Pour point °C |
DIN ISO 3016 |
<-18 |
< -16 |
<-15 |
<-12 |
<-10 |
Flash point °C |
DIN ISO 2592 |
244 |
> 250 |
255 |
260 |
265 |
Density g/ml 29.5 °C |
DIN EN ISO 3838 |
.893 |
0,898 |
.900 |
.910 |
.925 |
Colour |
|
colourless - yellowish |
colourless - yellowish |
colourless - yellowish |
colourless - yellowish |
colourless – yellowish |
FZG Damage step A/16.6/90 |
DIN 51 354 T2 |
>12 |
> 12 |
>12 |
>12 |
>14 |
FZG wear |
DIN 51 354 T2 |
-- |
< 0.2 |
< 0.2 |
< 0.2 |
< 0.2 |
FZG (Micropitting ) Load/GFT |
FVA 54 (I-IV) |
-- |
>10/High |
>10/High |
>10/High |
>10/High |